Overview
The Omix-ADA Dana 35 differential cover gasket, part number 16502.04, is a direct OE replacement gasket for the rear Dana 35 axle. It is built to original specifications and carries a limited five year warranty.
Dana 35 cover maintenance
The differential cover gasket seals the carrier housing, so a leak usually starts at the cover edge or along the bolt pattern. Clean both mating surfaces thoroughly before fitting a new gasket, and remove old sealant or gasket fragments so the seal sits flat. Uneven torque on the cover bolts is a common reason a new gasket still weeps.
Check the fill level and oil condition at regular intervals, since a cover leak can lower the oil enough to run the gears dry. Look for seepage around the cover, dried oil on the axle tube, or a film on the brake backing plate. Replacing the gasket is a good time to inspect the cover magnet for metal debris.
- Clean mating surfaces before installation
- Tighten cover bolts in a crisscross pattern
- Check fluid level after the first drive
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16502.04 |
| UPC | 804314026684 |
| Axle location | Rear |
| Axle type | Dana 35 |
| Fitment | Direct Fit |
| Warranty | Limited five year warranty |
Vehicle fitment
Omix-ADA gives no vehicle or year for this gasket, only a Dana 35 rear axle and a Direct Fit label. Confirm your axle is a Dana 35 before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One differential cover gasket.
Not included: The differential cover, fill plug and gear oil are not part of this kit.









