Overview
The Omix-ADA Coil Spring, Front, Stock (part number OAI18280.13) is a single front replacement coil spring for the 1984–2001 Jeep Cherokee (XJ). It is a direct OE replacement built to original specifications.
The spring sits at stock height, with a 2.5-inch lift range matching the title. It is covered by a limited five-year warranty.
Key features
- Direct OE replacement spring built to original specifications
- Stock height, with a 2.5-inch lift range listed
- Front position
- Black finish
- Sold individually, one spring per part number
- Limited five-year warranty
Replacing front springs evenly
The front coil spring carries much of the Cherokee’s weight, so its height directly sets the front corner position. When one side sags, the vehicle may lean, the steering can feel loose and tires can wear unevenly. Front springs are normally replaced as a pair so both sides carry similar load and keep the same ride height. Before removing the old spring, support the axle or control arm and use a proper spring compressor, since the spring stores a lot of energy.
The front suspension on an XJ also includes shocks, bushings and upper spring perches. Inspect these while the spring is out, because worn shocks can make a new spring feel harsh and worn bushings change how the arms hold their position. Clean the spring seat before fitting the new spring and confirm the coil sits correctly in the seat. After the first few drives, check the height on both sides and recheck the alignment.
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | OAI18280.13 |
| Position | Front |
| Height | Stock to 2.5 inches |
| Color | Black |
| Quantity | Single spring |
| Warranty | Limited five-year warranty |
| Fitment type | Direct fit |
Vehicle fitment
The spring fits the 1984–2001 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport models.
The Grand Cherokee and other Jeep models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coil springs are usually replaced in pairs, so a single spring should be matched to the spring on the other side for an even height and ride.
What’s included
One front coil spring.






