Overview
The Fabtech 3 Inch Lift Dual Rate Rear Coil Spring Set (part number FTS24260) is a pair of rear coil springs with a dual rate design. The stated height range is 2 to 3.5 inches, and the springs are black.
Dual rate springs use two stages. The first stage is soft, which responds to small bumps and gives a comfortable ride at low speed. As the spring compresses further, the rate rises to absorb larger impacts and support added cargo.
Key features
- Dual rate coil design with a soft first stage
- Corner-specific springs to keep a level stance from side to side
- Offers factory load carrying capacity.
- Increased suspension travel for off-road use
- Stated height range of 2 to 3.5 inches
- Black finish
Rear springs and load
Rear coil springs carry the weight of the rear axle and the cargo in the bed or cargo area. A dual rate spring suits a vehicle that sees both empty and loaded use, because the first stage handles light loads and the second stage supports heavier ones. Choose the height range with your normal loads in mind.
Replacing rear springs changes the rear ride height, and that changes the axle position and the angle of the driveline. Brake lines may also need to be checked for length and tension. Check the rear shock mounts and bump stops, since a height change can alter how they engage.
Spring wear is usually seen as sagging, uneven height from side to side or a rear end that bounces after bumps. Inspect the springs for cracked coatings, which can let corrosion start.
- Check driveline angles after installation
- Inspect brake line length and tension
- Look at shock mounts and bump stops
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS24260 |
| Location | Rear |
| Height range | 2 to 3.5 inches |
| Color | Black |
| Spring design | Dual rate |
| Origin | The springs are American made. |
| Fitment type | No vehicle listed |
Vehicle fitment
This spring set is not matched to one vehicle. The Jeep Gladiator is the intended vehicle, but the model year, cab and bed or wheelbase still need to be confirmed. Coil springs are sized for a specific vehicle, so confirm the application before installing.
Confirm the model year, the cab and bed or wheelbase, and the factory rear spring type with Fabtech before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing rear springs changes the rear ride height, so check the driveline angles and the brake line length once the new springs are installed.
What’s included
The kit is a pair of rear dual rate coil springs. Check the package contents against your installation before starting.







