Overview
The Crown Automotive J8134270 is a manual brake master cylinder for 1978–1983 Jeep CJ5, 1978–1986 CJ7 and 1981–1985 Scrambler models. It is intended for vehicles with manual brakes and for 2 bolt calipers.
It is a direct-fit replacement for a disc/drum brake system.
Key features
- Manual brake master cylinder
- For vehicles with manual brakes
- For 2 bolt calipers
- Direct-fit replacement, disc/drum setup
Bleeding and pedal feel
The master cylinder turns pedal pressure into hydraulic pressure for the brake lines. It also holds a reservoir of brake fluid that feeds the system and compensates for pad wear. Because this is a manual-brake setup, pedal effort comes entirely from your foot, so a firm, steady pedal is a sign of a healthy cylinder.
After replacing a master cylinder, bleed the system thoroughly to remove air from the lines and calipers. Start at the farthest wheel and work toward the nearest, and keep the reservoir topped up so air does not re-enter. Check the pedal for a firm feel before driving, and inspect every fitting for leaks.
- Bleed from the farthest wheel first
- Keep the reservoir filled during bleeding
- Use fresh brake fluid of the type your system requires
- Check all fittings for leaks
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8134270 |
| UPC | 848399072228 |
| Part type | Manual brake master cylinder |
| Caliper type | 2 bolt |
| Type | Replacement |
| Fit style | Direct fit |
| Brake configuration | Disc/drum |
Vehicle fitment
It fits the 1978–1983 Jeep CJ5, the 1978–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler.
The cylinder is for 2 bolt calipers and manual brakes, so it does not suit power-brake versions of these Jeeps. Confirm your vehicle’s year, model and trim before ordering.














