Overview
The Omix-ADA 16750.01 is a brake shoe anchor cam for the front brakes of early Willys and Jeep vehicles, including the 1941–1942 Willys MB and the Willys CJ-2 and CJ-3. It is a direct OE replacement built to original specifications.
An anchor cam sits at the fixed end of a drum brake shoe pair and gives the shoes a pivot and a means of adjustment. Each part number is sold as one cam.
Key features
- Direct OE replacement part for early Jeep drum brakes
- Built to the original specifications
- Front position
- Single anchor cam per part number
- Carries a limited five-year warranty
Before you replace the cam
Anchor cams see steady pressure from the shoes as the brakes work, so the pivot area should be inspected whenever the shoes are off. Look for wear, grooves or flat spots where the shoe end rests, and check that the adjuster turns smoothly. Clean the cam and backing plate before fitting new parts, and lubricate only the pivot surfaces that call for it, keeping grease off the friction lining.
Anchor cams are usually replaced with the shoes, springs and drum service in the same job, since worn parts in one place can affect the others. Check that the drum is round and the lining is not glazed before reassembly.
- Inspect the pivot for wear
- Check the adjuster for smooth travel
- Keep grease off the lining
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16750.01 |
| UPC | 804314009083 |
| Product type | Brake shoe anchor cam |
| Position | Front |
| Fit type | Direct fit |
| Quantity | Single unit |
| Warranty | Limited five years |
Vehicle fitment
The 16750.01 fits the 1946–1949 Willys CJ-2, the 1949–1953 Willys CJ-3 and the 1941–1942 Willys MB.
The list stops at the early Willys models and does not include the CJ-5, CJ-6 or later CJ-7. Confirm your vehicle’s year, model and trim before ordering.









