Overview
The Omix-ADA 16733.01 is a rear brake line for early Jeep CJ and Willys models, measuring 15 inch overall length. It is sized for stock height, 0 to 2 inches of lift.
Key features
- 15 inch overall length
- Rear position
- Stock height, 0 inches to 2 inches of lift
- Direct-fit OE-style replacement
- It carries a limited five year warranty.
Routing and replacing rear lines
A rear brake line carries fluid from the frame to the wheel cylinder or hose at the axle. On older CJ models the line runs along the frame and can rust, so inspect the full length for corrosion, dents or seepage at the fittings before replacing a single section.
Rubber hoses flex as the axle moves and should be checked for cracking, swelling or soft spots. When one section is replaced, check the fittings and flare ends, since a worn fitting can leak even with a new line. Bleed the brakes after any line is opened so the system is clear of air before driving.
- Inspect the whole run for rust before installing
- Check flare fittings for damage
- Bleed the system after any line is disconnected
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16733.01 |
| Position | Rear |
| Overall length | 15 inch |
| Hose material | Rubber |
| Lift height | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
It fits the 1959–1960 and 1966 CJ3, the 1959–1960 and 1966–1971 CJ5 and CJ6, the 1946–1949 Willys CJ-2, the 1949–1958 Willys CJ-3, the 1955–1958 Willys CJ-5, the 1956–1958 Willys CJ-6 and the 1941–1942 Willys MB.
The hose is rubber. Confirm the material against your needs before ordering.









