Overview
The Omix-ADA OAI12021.64 is a V-frame bracket that connects the frame rails to the rear crossmember and reinforces the crossmember where the two meet. It fits the 1959–1964 Jeep CJ3, CJ5 and CJ6 and early Willys models from 1941 to 1958.
Omix-ADA makes the bracket as a direct replacement for the original part, to the original specifications, and gives a limited five year warranty.
Key features
- Connects the frame rails to the rear crossmember
- Reinforces the rear crossmember
- Direct OE replacement design
- Limited five year manufacturer warranty
Checking the rear frame area
The rear crossmember carries load from the body and the rear axle mounts, so the joints where it meets the frame see real stress over time. Cracks often start at the welds or the corners of a bracket, and a reinforcing bracket helps spread that load. Inspect the frame rails, crossmember and bracket welds at the same time when you install a new one.
Surface rust on early Jeep frames is common in areas that trap mud and water. Clean the area down to bare metal before fitting the bracket, and check for thin spots that a wire brush or a probe reveals. Repaint or coat the joint once the bracket is bolted or welded in place.
If the frame is cracked beyond the bracket area, a bracket alone will not repair it, and the frame should be assessed before driving the vehicle further. Matching the bracket to the correct body and model years matters for alignment.
- Check the frame rails for cracks
- Clean rust before fitting
- Repaint after installation
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | OAI12021.64 |
| UPC | 804314066086 |
| Type | V-frame bracket |
| Function | Connects frame rails to the rear crossmember |
| Warranty | Limited five year, from the manufacturer |
| Fitment type | Direct fit |
Vehicle fitment
The fitment data covers the 1959–1964 Jeep CJ3, CJ5 and CJ6 (Base), the 1946–1949 Willys CJ-2, the 1949–1958 Willys CJ-3, the 1955–1958 Willys CJ-5, the 1956–1958 Willys CJ-6, and the 1941–1943 Willys MB (Base).
The fitment data does not include the CJ7 from 1976 to 1986, the Scrambler or any Wrangler. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is a single V-frame bracket. Check the package contents against your installation before starting.









