Overview
The Omix-Ada OAI11020.01 is a bolt-on rear view mirror with a mounting bracket for classic Jeep CJ and Willys models. It is an OE-style replacement that bolts on directly, so owners can restore a stock-style mirror without modifying the body.
It fits 1959-1966 CJ3, 1959-1975 CJ5 and CJ6, 1966-1968 CJ5A and CJ6A, and many 1943-1958 Willys models, including CJ-2, CJ-3, CJ-5, CJ-6, DJ-3, FJ, Jeepster, Truck and Panel models.
Key features
- Bolt-on mount with no drilling required
- Includes the mirror and mounting bracket
- OE style for a factory-like appearance
- Direct-fit application
Mounting on a classic body
Classic CJ and Willys bodies have thinner door and cowl metal than later Jeeps, so the mounting point is worth inspecting before fitting. Look for rust, bent brackets and cracked seams around the mount. Light surface rust can be treated before installation, while soft or perforated metal should be repaired first so the bracket holds firmly over rough roads.
A stock-style mirror mainly helps with rear visibility on narrow roads and trails, so set the head so it shows the rear corner of the vehicle. Adjust it with the vehicle parked and recheck after the first drive, since a mirror that drifts out of position can be hard to notice until it moves further.
- Inspect the bracket for rust before fitting
- Check the arm and head for play
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI11020.01 |
| Type | Rear view mirror |
| Included | Mirror and mounting bracket |
| Not included | Screws |
| Drilling | Not required |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1959-1966 Jeep CJ3 (Base), 1959-1975 CJ5 (Base, Renegade), 1966-1968 CJ5A (Base), 1959-1975 CJ6 (Base), 1966-1968 CJ6A (Base), and Willys models including 1947-1955 1-Ton, 1947-1950 463, 1951-1952 473, 1950 and 1956-1958 Base, 1943-1949 CJ-2, 1949-1958 CJ-3 (Chassis), 1955-1958 CJ-5, 1956-1958 CJ-6, 1956-1958 DJ-3, 1951 FJ, 1948-1952 Jeepster, 1946-1950 Panel, 1951-1955 Sedan Delivery, 1947-1954 Truck and 1955 Utility Wagon. Wrangler YJ and TJ, along with CJ7 and later Jeeps, do not fit.
Wrangler YJ and TJ are not covered by this list, nor are the CJ7 or later Jeeps. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket bolts on with no drilling, so the job is a direct swap for the old mirror. Screws are not included, so have suitable fasteners ready before starting.
What’s included
One rear view mirror with its mounting bracket.
Not included: screws.










