Overview
The Omix-ADA 17250.01 is a non-polished ignition lock and cylinder with keys, with threaded terminals and dash mounting. It is a direct OE replacement built to original Jeep specifications for early Willys and Jeep models from 1946 to 1966.
It fits the Willys CJ-2, CJ-3, CJ-5 and CJ-6, the Jeep CJ3, CJ5 and CJ6 from 1959 to 1960 and 1966, the Commando, Dispatcher, DJ3, DJ5, DJ6, F4, FC150, FC170, FC170HD, Gladiator, J-series trucks, Jeepster, Tornado, Universal, Utility and Wagoneer (SJ) models. Threaded terminals and a non-polished finish are part of the design.
Key features
- Non-polished finish
- Threaded terminals
- Dash mounting type
- Direct OE replacement built to original specifications
Before you install the lock
An ignition lock and cylinder works with the key and the wiring behind the dash to start the engine and power the accessory circuits. On older Jeep dashes, the cylinder and its terminals are often the parts that show wear first, especially when keys turn hard or the lock feels loose. Before you pull the old unit, note which terminal goes where and take a photo of the wiring so the new lock matches the harness.
When choosing a replacement, match the mounting style and terminal type to the dash you have. Keep the original keys with the lock, and check spare keys so the cylinder operates smoothly before the vehicle is back on the road. Lubricate the cylinder lightly with a dry graphite product if it sticks, and avoid heavy oils that collect dirt. Test every position of the key after installation, including the accessory and off positions.
- Label each wire before removing the old lock
- Use a dry lubricant on the cylinder only
- Test the lock in every key position
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17250.01 |
| UPC | 804314016562 |
| Product type | Ignition lock and cylinder with keys |
| Finish | Non-polished |
| Terminals | Threaded |
| Mounting type | Dash |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1959 to 1960 and 1966 Jeep CJ3, CJ5 and CJ6, the 1966 Commando, the 1961 to 1966 Dispatcher, the 1959 to 1960 DJ3, the 1966 DJ5 and DJ6, the 1957 to 1958 F4, the 1958 to 1966 FC150, the 1963 to 1966 FC170 and FC170HD, the 1963 to 1966 Gladiator and J-100, the 1965 to 1966 J-2500, the 1966 Jeepster, the 1962 Tornado, the 1966 Universal, the 1961 to 1962 Utility, the 1963 to 1966 Wagoneer (SJ), and Willys models from 1946 to 1958.
Close vehicles that are not on the list include the CJ3, CJ5 and CJ6 models from 1961 to 1965 and from 1967 on. Confirm your vehicle’s year, model and trim before ordering.
What’s included
It includes one ignition lock and cylinder with keys, supplied as an OE replacement. Check the package contents against your installation before starting, including the switch and wiring.
















