Overview
The Moog K7401 is a press-in front lower ball joint for 2000–2001 Dodge Ram 1500 four-wheel-drive models, including Laramie, ST, Sport and WS versions. It is greasable and has a hardened ball stud. It is a front lower joint only, and the upper joint is a separate part.
The joint may look different from earlier versions because of its new design. It has a dust boot with an encapsulated Belleville washer, a larger grease reservoir, a powdered metal bearing that carries grease to the stud and a greasable socket that reduces corrosion and wear.
Key features
- Four-wheel-drive models only
- Press-in type
- Greasable socket
- Hardened ball stud.
- Powdered metal bearing that carries grease to the stud
Inspecting a new-design joint
Four-wheel-drive Ram trucks put steering and suspension loads through the front lower joint on every turn and bump, so small amounts of play can grow quickly. Wear often appears as a clunk when turning from lock to lock, or a wander at highway speed. A quick check with the wheel lifted and the joint loaded helps show whether the joint is worn before any parts are ordered.
When a design has changed, the boot, grease fitting and joint body may differ from the original, so compare the parts side by side before pressing. Look for cracks in the boot and check that the grease fitting threads cleanly. Upper ball joints, tie rods and steering dampers are commonly checked at the same time as the lower joint.
- Compare boot and fitting against the old joint
- Check the grease fitting threads before installing
- Inspect upper joint and tie rods at the same visit
Specifications
| Brand | Moog |
|---|---|
| Part number | K7401 |
| Position | Front lower |
| Drive type | Four-wheel drive |
| Installation type | Press-in |
| Lubeable | Yes |
Vehicle fitment
It fits this vehicle, in four-wheel-drive form:
- 2000–2001 Dodge Ram 1500 (Laramie, ST, Sport and WS)
Two-wheel-drive Ram 1500 models and later Ram years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The joint is a press-in type. Because the design is new, compare the joint with the old one, including the boot and grease fitting, before pressing. Check the new boot and grease fitting for damage before pressing the joint into the arm.
What’s included
Make sure the package contents match your installation steps before starting.










