Overview
The Moog K7465 is a press-in, greasable front lower ball joint, part number MOGK7465, for Dodge and Ram full-size pickups from 2003 to 2013.
The lower ball joint sits between the steering knuckle and the lower control arm, letting the wheel pivot as the suspension moves. This version has a hardened ball stud, a forged housing and a larger grease reservoir for longer service life.
Key features
- Press-in installation into the steering knuckle
- Hardened ball stud made of materials Moog rates as OE equivalent or better
- Dust boot with an encapsulated Belleville washer to control axial and radial movement
- Powdered metal gusher bearing that carries grease through to the stud
- Forged housing with up to 52% more material in key areas
- Pre-tapped grease fitting hole and a larger grease reservoir
- Greasable socket that flushes contaminants out with new lubricant
Installing a press-in joint
A press-in joint is seated into the steering knuckle with a press or the correct installation tools, so a wrench alone is not enough. Clean the bore thoroughly, check for rust or burrs, and press the joint straight so it seats fully. A joint pressed in at an angle can bind, load the stud unevenly and wear the boot early.
Support the vehicle securely on stands before any front suspension work, and never rely on a jack alone. After the joint is seated and the rest of the assembly is back together, grease it through the fitting and check that the wheel turns freely. Have the front alignment checked once the work is complete.
- Use a press or tools made for the joint
- Clean and inspect the knuckle bore
- Support the vehicle securely
- Grease the joint after installation
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGK7465 |
| Position | Front lower |
| Joint type | Press-in |
| Greasable | Yes, with a pre-tapped grease fitting hole |
| Ball stud | Hardened |
| Housing | Forged, up to 52% more material in key areas |
Vehicle fitment
It fits the 2006–2008 and 2012 Dodge Ram 1500, the 2003–2010 Dodge Ram 2500 and 3500, the 2011–2013 Ram 2500 and the 2011–2012 Ram 3500. Other Ram 1500 years are not covered, so confirm fit for your vehicle’s year, model and trim before ordering.
Earlier and later Ram generations, and Dodge models not named above, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a press-in joint, it needs a press or the correct installation tools rather than a wrench alone. Support the vehicle securely before working on the front suspension.
What’s included
One Moog front lower ball joint, part MOGK7465, is supplied. Check the package contents against your installation before starting.










