Overview
The K500245 is a press-in front lower ball joint for vehicles with aluminum factory suspension. It fits 2014–2016 full-size GM trucks and SUVs.
Moog says its Problem Solver products incorporate proven design and engineering features. The K500245 has a hardened ball stud made of OE equivalent or better materials, a powdered metal gusher bearing design that lets grease flow through the bearing to the stud, and a forged housing with up to 52% more material in key areas. The joint is greaseable.
The K500245 is built around a design focused on steering feel, ease of installation and service life. The press-in joint is made for vehicles with aluminum factory suspension.
The housing is a premium forged design with increased cross section, and the socket is greaseable so that new lubricant can flush out contaminants and reduce corrosion and wear. The catalog number is MOGK500245. Moog describes itself as the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs, which is the company’s own statement.
Key features
- Front lower ball joint, press-in type
- For aluminum factory suspension
- Hardened ball stud made of OE equivalent or better materials
- Powdered metal gusher bearing design lets grease flow to the stud
- Forged housing with up to 52% more material in key areas
- Larger grease reservoir and pre-tapped grease fitting hole
- Greaseable socket reduces corrosion and wear
- Sold individually
Choosing the right lower joint
A lower ball joint should match the front suspension it was built for, so confirm the factory design before buying. Aluminum and steel control arms differ in how the joint seats and how it is pressed in, which makes the arm part of the fit check as well as the vehicle year and trim.
Full-size trucks and SUVs place more load on the joint, so a greaseable socket and a hardened stud are useful features for long service life. Use a press suitable for the arm, keep the bore clean, and keep the dust boot intact. Because steering parts are safety-critical, have the joint installed by a qualified technician if you are not experienced with pressing.
- Confirm the control arm type before ordering
- Clean the bore before pressing
- Check the boot for damage before fitting
- Have the alignment checked after the work
Specifications
| Brand | Moog |
|---|---|
| Part number | K500245 |
| Catalog number | MOGK500245 |
| Part type | Front lower ball joint |
| Joint type | Lower ball joint, press-in |
| Lubrication | Greaseable (lubeable) |
| Suspension | For aluminum factory suspension |
| Quantity | Sold individually |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Moog K500245 covers these vehicles: 2015–2016 Cadillac Escalade and Escalade ESV (Base, Luxury, Platinum, Premium); 2014–2016 Chevrolet Silverado 1500 (Custom, High Country, LS, LT, LTZ, SSV, WT); 2015–2016 Chevrolet Suburban (LS, LT, LTZ) and Tahoe (LS, LT, LTZ, PPV, SSV); 2014–2016 GMC Sierra 1500 (Base, Denali, SLE, SLT); and 2015–2016 GMC Yukon and Yukon XL (Denali, SLE, SLT).
It fits the 2014–2016 GM full-size trucks and SUVs named in the vehicle fitment section, not earlier years or the Silverado 2500 and 3500. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Steering components are safety-critical, so professional installation is the safer choice. Tighten fasteners to the torque value for your vehicle, re-check them after the first miles of driving, and have the alignment checked after steering or suspension work.
What’s included
It includes grease fittings, a castle nut, a cotter pin and hardware.










