Overview
Moog’s front lower ball joint fits 2003 to 2014 Ram vehicles and is sold individually.
This joint has a patented cover plate and a powdered metal gusher bearing, and it is lubeable.
Problem Solver joints are built for like-new steering, easier installation and longer working life. Grease moves through the powdered metal gusher bearing to the stud, which reduces friction.
The cover plate allows tighter tolerances than traditional cover plates. The full ball metal stud gives 360 degrees of smooth, consistent movement for more responsive steering.
Its design matters most at service time, since the joint is lubeable and the grease path runs through the bearing.
Key features
- Front lower position
- Lubeable
- Powdered metal gusher bearing
- Patented cover plate design
- Sold individually
- Full ball metal stud for smooth, consistent rotation
- Coated metal bearings for smooth stud swing
Replacing a Ram lower joint
The lower ball joint carries the weight of the front wheel and lets the knuckle pivot as the steering turns. On a Ram, the lower joint wears from road shock, dust and grit that get past a damaged boot. Because the joint takes both load and rotation, the condition of the boot and the grease path affects how long it lasts. Replace it before play becomes large enough to shift the wheel alignment.
Work on one side at a time and keep the new joint’s stud fully seated before tightening the castle nut or retainer. Use the torque your hardware requires, and recheck the fasteners after the first drive. Because the upper joint and control arm bushings work with the lower joint, inspect them while the front end is apart. Alignment should be checked after the work is finished.
- Inspect the upper joint and bushings during the same job
- Keep grit out of the stud taper before assembly
- Get an alignment check after the front end is reassembled
Specifications
| Brand | Moog |
|---|---|
| UPC | 80066326993 |
| Position | Front lower |
| Lubeable | Yes |
| Sold | Individually |
| Stud | Full ball metal |
Vehicle fitment
It fits 2003–2014 Ram vehicles. Confirm fit for your vehicle’s year, model and trim before ordering, since the model and chassis must match.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front lower ball joint, sold individually.









