Overview
The Method Race Wheels 305 NV 18×9 matte black wheel, part number MRWMR30589087518, uses an 8 on 170 bolt pattern and a 131 center bore. It is an 18-inch aluminum windowed wheel with an offset of 18 and backspacing of 5.75, and it is universal fit without a specific vehicle tied to it.
Method Race Wheels describes its MR305 NV wheels as designed for off-road racing use. The brand says analysis tools and field tests shaped the design, aiming for a wheel that weighs less yet stays strong. Method summarizes that aim as lighter, stronger and faster, which are its own claims rather than independent test results.
Key features
- Aluminum build with a windowed style
- 18-inch diameter and 9-inch width
- Matte black finish
- 8 on 170 bolt pattern with a 131 center bore
- Offset of 18 and backspacing of 5.75
- MR305 NV series
- Universal fit, with no vehicle named.
Wheel weight and strength
Lighter wheels reduce unsprung weight, which can help suspension respond to bumps and keep tires in contact with the ground. Strength matters just as much, because a wheel that flexes under trail loads can crack or lose air. Aluminum construction is commonly used for off-road wheels because it balances weight and strength, though the result depends on design and use.
A matte black finish with a windowed style is also a visual choice. Consider how often the wheel will be cleaned, since trail mud and brake dust collect in window edges. Plan periodic inspection of the wheel face and lip for cracks, especially after hard impacts or curb strikes.
- Inspect after hard impacts or rock strikes
- Clean window edges to remove trapped mud
- Consider tire weight when comparing setups
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30589087518 |
| Series | MR305 NV |
| Diameter | 18 inches |
| Width | 9 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 131 |
| Offset | 18 |
| Backspacing | 5.75 |
| Construction | Aluminum |
| Style | Windowed |
| Finish | Black |
| Fitment | Universal fit |
Vehicle fitment
This wheel is not tied to a particular vehicle, as it is universal fit. Check the 8 on 170 bolt pattern, 131 center bore, 18 offset and 5.75 backspacing against your vehicle’s hub and clearance requirements before choosing it.
Universal fit does not confirm clearance for any particular vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Offset and backspacing together set where the wheel sits in the wheel well. Check brake and suspension clearance with the tire you plan to run before driving the vehicle.
What’s included
No accessories are named here, so tires, lug nuts and center caps should be treated as unconfirmed.











