Overview
Method Race Wheels MR312 part MRWMR31278587500 is a Matte Black, 17 by 8.5 inch aluminum wheel with an 8 on 170 bolt pattern and a 131 center bore. Method marks it Universal Fit, which suits most trucks, Jeeps and SUVs, so no single model is named.
The MR312 follows the design of Method’s 106 Beadlock. A concave split-six spoke face sits behind the v.3 Stree-Loc ring, and a small Method name is debossed on one spoke. Stainless steel bolts around the lip are removable and shear protected. The 8 on 170 pattern, 131 center bore and 0 offset are the figures to check against the vehicle before mounting.
Key features
- Matte Black finish on aluminum construction
- 8 on 170 bolt pattern with a 131 center bore
- Concave split-six spoke face with a debossed Method name
- v.3 Stree-Loc ring
- Removable stainless steel lip bolts, shear protected
- Bolt-on center cap with hardware
Matte black care and upkeep
Matte finishes need different care than gloss paint. Waxes and polishes can leave shiny patches on a matte surface, so use a pH-neutral wheel cleaner and a soft cloth. Road salt and brake dust bond to matte coatings more readily, so rinse the wheel after winter drives and wipe the spokes dry to prevent staining.
Wheel weight and tire pairing affect how the wheel carries load on rough ground. A heavier tire or a larger sidewall adds stress to the spoke joints and the lip, so inspect those areas after hard trail use. Keep an eye on the bolt-on center cap seating, since a loose cap can rattle or work free at speed.
- Use pH-neutral cleaner on matte surfaces
- Avoid wax and polish on the face
- Inspect spoke joints after hard trail use
- Check the center cap seats flush after mounting
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31278587500 |
| Series | MR312 |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 131 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
Universal Fit is the fitment Method gives this wheel, so it is not built for one year or model. The 8 on 170 pattern and 131 center bore need to be matched to the hub of your truck, Jeep or SUV before selection.
Clearance to brakes and suspension is not confirmed for any model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A zero offset places the mounting surface at the middle of the wheel width, which influences how the tire sits inside the fender. Check the 131 center bore against your hub before fitting. Attach the bolt-on center cap with its included hardware. Verify clearance after the tire is on, since offset and backspacing decide how far the wheel sits.
What’s included
The package contains the wheel along with a bolt-on center cap and its hardware. Tires and lug nuts are not part of it.










