Overview
The Method Race Wheels 706 Bead Grip in 17×8.5 with a 5 on 5 bolt pattern and bronze finish is a solid A356 aluminum wheel. Its six-point design carries debossed Method logos, and the wheel is DOT approved.
Bead Grip is designed to let tires run at deflation pressures that would normally call for beadlock wheels. The reinforced inner lip is styled after race wheels.
Key features
- Solid A356 aluminum construction
- Six-point design with debossed Method logos
- Race-styled reinforced inner lip
- Bead Grip technology, patented by Method
- DOT approved
Choosing wheels for your setup
Wheel fit comes down to several measurements working together. Bolt pattern and center bore must match the hub, and offset controls how far the wheel sits inside or outside the fender. A wheel with a different offset can rub the suspension or fender, so compare offset with the wheel you are replacing before ordering.
Tires and wheels are usually replaced together, and a new tire should be sized to the wheel’s width and diameter. Alloy wheels need lug nuts or studs with the correct seat style, and retorquing after the first few drives helps the wheel seat fully. Bead Grip is useful when running lower tire pressures off road, so tire choice and pressure should be planned together.
- Compare offset with the wheel you are replacing
- Match lug seat style to the wheel
- Retorque lug nuts after the first few drives
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70678550925 |
| Size | 17×8.5 |
| Bolt pattern | 5 on 5 |
| Finish | Bronze |
| Material | A356 aluminum |
| Design | Six-point |
| Approval | DOT approved |
Vehicle fitment
Match the 5 on 5 bolt pattern and 17×8.5 size to your vehicle’s hub and wheel specifications before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The wheel is the item described.
Not included: tires.










