Overview
The Method Race Wheels MR301 The Standard 16×8 is a black aluminum spoke wheel measuring 16 inches in diameter and 8 inches wide, with a 5 on 5 bolt pattern. It carries a 94 center bore, a 0 offset and a 4.5 backspacing, and its part number is MRWMR30168050500. Method sells it as part of the MR301 The Standard series.
Each wheel is engineered for its intended use and developed through numerous finite element analysis cycles and field tests. The aim is a wheel that weighs less yet stays strong. It is universal fit, so the bolt pattern, bore and offset must be checked by hand.
Black is the finish for this wheel. Because it is universal fit, a 5 on 5 hub needs the bore, offset and backspacing checked before the wheel is fitted.
Key features
- 16-inch diameter and 8-inch width
- Aluminum spoke design in black
- 5 on 5 bolt pattern with a 94 center bore
- Zero offset and 4.5 backspacing
- Built with Finite Element Analysis and field testing
- Part of the MR301 The Standard series
Hub match and brake clearance
A 5 on 5 bolt pattern only matches hubs with the same stud count and spacing, so the pattern is a starting point rather than proof of fit. The center bore, offset and backspacing decide whether the wheel centers properly and clears the brake caliper and suspension. Compare each of these with the hub and the existing wheels before choosing.
Brake caliper clearance is worth checking with the wheel on the hub, turning the steering fully in both directions. Look for contact with the caliper, brake line or inner fender. Clean the hub face and tighten the lugs evenly, and re-check torque once the vehicle has been driven a short distance.
- Match stud count and spacing before anything else
- Check caliper clearance at full steering lock
- Re-check lug torque after a short drive
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30168050500 |
| Series | MR301 The Standard |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Black |
| Wheel diameter | 16 inches |
| Wheel width | 8 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 94 |
| Offset | 0 |
| Backspacing | 4.5 |
Vehicle fitment
Method lists universal fit and names no specific vehicle, so the 5 on 5 pattern and 94 center bore must be matched to your own hub. Compare the 0 offset and 4.5 backspacing with your current wheels before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Zero offset and 4.5 backspacing change where the wheel sits relative to the brakes and suspension, so measure those clearances before mounting. Check tire rub at full steering lock once the wheel is on.
What’s included
Plan on having lug nuts, center caps and a tire ready before mounting this single wheel.











