Overview
The Method Race Wheels 309 Grid 18×9 is an aluminum mesh wheel with part number MRWMR30989060800, a 6 on 5.5 bolt pattern and a 108 center bore. Its finish appears as titanium and black and as gray, so confirm the color on arrival.
The 309 Grid is designed for off-road use, with finite element analysis and field testing used to reduce weight while adding strength.
Key features
- Aluminum construction with a mesh (grid) face style
- 18 inch diameter and 9 inch width
- 6 on 5.5 bolt pattern with a 108 center bore
- Offset 0 with 5 backspacing
- Part of the MR309 Grid series from Method Race Wheels
Hub-centric rings and bore
The center bore decides how the wheel sits on the hub. When the bore is larger than the hub, the wheel can only be held by the lug nuts and may vibrate. Hub-centric rings close that gap and let the hub carry the load. Measure the hub carefully before ordering rings, because the ring size must match both figures.
Offset 0 and backspacing 5 control how the wheel sits against brakes and suspension. The face sits at the centerline, so clearance should be checked on both the inboard and outboard sides. Tire width is the other variable and should be considered before mounting.
Mesh faces collect debris in their openings, and cleaning them routinely helps protect the finish. Check the lug nut seat style before tightening, and recheck torque after the first short drives.
- Measure hub bore before choosing rings
- Check inboard and outboard clearance
- Clean mesh openings regularly
- Recheck torque early
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30989060800 |
| Series | MR309 Grid |
| Construction | Aluminum |
| Style | Mesh |
| Finish | Gray (spec sheet); titanium / black (product name) |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 5 |
Vehicle fitment
No specific vehicle is named for this wheel. The fitment field reads Universal Fit, which does not identify a make, model or year, so match the bolt pattern, center bore, offset and backspacing to your vehicle yourself.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Offset and backspacing control how far the wheel sits in the fender and how much room it leaves for brakes and suspension parts. Compare these figures with your vehicle’s specifications, and confirm the 108 center bore matches your hub; if it does not, hub-centric rings are needed.
What’s included
Confirm lug nuts, center caps and valve stems against your installation before ordering.











