Overview
The Method Race Wheels MR605 NV 20×10 with a 5×5.5 bolt pattern, part number MRWMR60521055924N, is a bronze aluminum wheel from Method’s 600 Series. It measures 20 inches in diameter and 10 inches wide, and it uses the windowed style with a Street-Loc lip.
Method presents the MR605 NV as a development of the MR305 NV, with more aggressive sizing that includes 20×10 and 20×12. The deep-dish face is aimed at lifted trucks, Jeeps and SUVs. Method labels this model universal fit, but the 5-on-5.5 pattern, 108 center bore and -24 offset still have to match your own hub.
Key features
- Street-Loc lip is standard on this one-piece wheel, with removable stainless steel bolts set around the lip.
- The 20×10 size carries a 3-inch lip.
- A bolt-on aluminum center ring holds a snap-in cap with a raised Method logo for 5 and 6 lug applications.
- Two large debossed Method logos sit around the bolt circle.
- Offset of -24 and backspacing of 4.55 produce the deep-dish look.
- Load rating of 2650 lbs for 5 and 6 lug applications.
Hub fit and seating checks
Before a wheel goes on, the hub face and wheel seat should be clean and free of rust or paint buildup. Debris can leave the wheel sitting slightly off center, which often shows up as a vibration at speed. Wipe both surfaces and confirm the wheel rests flat against the hub before the lug nuts go on.
A deep-face aluminum wheel moves the tire further outboard, so tire and fender clearance changes compared with a standard face. Recheck lug nut tightness after the first few drives, since new seats settle. Keep the removable lip bolts in a labeled container during tire service so none go missing.
- Clean the hub face and wheel seat before mounting
- Recheck lug nuts after the first few drives
- Inspect the lip bolts whenever the tire is removed
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR60521055924N |
| Series | MR605 NV (600 Series) |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Lip | 3 inches (20×10) |
| Offset | -24 |
| Backspacing | 4.55 |
| Center bore | 108 |
| Bolt pattern | 5 on 5.5 |
| Style | Windowed |
| Finish | Bronze |
| Construction | Aluminum, one-piece |
| Load rating | 2650 lbs (5 and 6 lug applications) |
| Fitment | Universal Fit (as labeled) |
Vehicle fitment
This wheel is labeled universal fit, so it is not tied to a specific model or year. Choose it by bolt pattern, center bore, offset and backspacing, then confirm the 5-on-5.5 pattern matches the hub on your truck, Jeep or SUV.
A 5-on-5.5 wheel will not bolt to a hub drilled for a different bolt count. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 5 and 6 lug versions use the snap-in cap, which sits in the bolt-on aluminum center ring rather than on the wheel face. Check the 108 center bore against your hub so the wheel seats properly. Because the offset is -24, confirm fender and suspension clearance on lifted vehicles before driving.
What’s included
The product covers the one-piece wheel with its bolt-on aluminum center ring, snap-in cap and removable stainless steel lip bolts.
Not included: Tires and lug nuts are not part of this wheel.










