Overview
The Method Race Wheels 309 Grid MR30978558500 is a 17×8.5 aluminum mesh wheel with a 5 on 150 bolt pattern in black. It is a universal fit wheel, so compatibility depends on the bolt pattern and hub measurements.
Method says its wheels are engineered for off-road racing and developed to minimize weight and increase strength, with numerous Finite Element Analysis and field tests. This MR309 Grid wheel has an offset of 0, 4.75 backspacing and a center bore of 116.
Key features
- 17×8.5 aluminum wheel
- 5 on 150 bolt pattern
- Black finish
- Mesh style, MR309 Grid series
- Offset 0, backspacing 4.75
- Center bore 116
Off-road wheel care
Wheels on rough trails take hits from rocks, roots and ruts, so the wheel and its fasteners need regular attention. Mesh openings are easy to inspect, which helps when looking for cracks around the spoke roots or a bent lip after a hard landing. Tighten lug nuts in a star pattern, and recheck them after the first few trail runs, since a loose stud can damage the hub.
Tire changes are the other routine task. Pull the tire, look at the bead seat for scoring, and clean away corrosion before remounting. A clean bead seat helps the tire seal and keeps the wheel balanced at speed.
- Inspect the bead seat each time the tire comes off
- Look for fine cracks near the spoke roots
- Re-torque lug nuts after the first few trail runs
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MR30978558500 (MRWMR30978558500) |
| Series | MR309 Grid |
| Style | Mesh |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 150 |
| Offset | 0 |
| Backspacing | 4.75 |
| Center bore | 116 |
| Finish | Matte black |
| Construction | Aluminum |
| Fit type | Universal fit |
Vehicle fitment
Fit depends on the 5 on 150 bolt pattern, center bore, offset and backspacing. Use part number MR30978558500 (MRWMR30978558500) and the UPC, when shown, to confirm you have the same item, since parts from the same maker can vary by vehicle, year or position.
Universal fit does not guarantee clearance. Confirm the bolt pattern, center bore, offset, backspacing and tire size for your vehicle before ordering.
Installation notes
Check brake caliper, suspension and fender clearance before mounting tires. Use lug nuts with the correct seat and tighten them to your vehicle’s torque figure. Re-torque the lug nuts after the first miles of driving. Have a qualified shop mount and balance the tires, since wheels and tires carry the full weight of the vehicle. Check clearance at full steering lock and full suspension travel. After mounting, set tire pressure to suit the tire and load. Keep the part number with your records and inspect the wheel and fasteners periodically, especially after off-road use.










