Overview
The Method Race Wheels 301 The Standard 18×9 is an 18-inch aluminum spoke wheel with a 9-inch width, an 8 on 180 bolt pattern and a machined finish, part number MRWMR30189088318. It belongs to Method’s MR301 The Standard series, a wheel line the company develops for off-road use.
Method develops its wheels for off-road racing, with each design engineered for its intended use and tested with finite element analysis and field trials. The aim is less weight with more strength. Offset is 18 and backspacing is 5.75. Offset is the distance from the mounting face to the centerline, and backspacing is the distance from the mounting face to the inner lip; together they set how far the wheel sits in the fender.
Key features
- Spoke design from the MR301 The Standard series
- Aluminum construction
- Machined finish
- 18-inch diameter and 9-inch width
- 8 on 180 bolt pattern
- Offset 18 and backspacing 5.75
- Center bore 131
How offset shapes the fit
Offset is the distance from the mounting face to the wheel’s centerline, and backspacing is the distance from the mounting face to the inner lip. Together they decide how far the wheel sits in the fender and how close it comes to brake and suspension parts. A higher offset tucks the wheel inward, which can reduce room at the inner fender.
Before mounting, compare these figures to the vehicle’s clearance rather than to a generic guide. Clearance is best checked with the tire on, at full steering lock, and with the suspension compressed. Any change to tire width or lift height changes these numbers, so re-check after each change.
- Measure inner clearance at full lock
- Recheck after changing tire width
- Plan spacers and hub rings only after measuring
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30189088318 |
| Series | MR301 The Standard |
| Style | Spoke |
| Diameter | 18 inches |
| Width | 9 inches |
| Offset | 18 |
| Backspacing | 5.75 |
| Center bore | 131 |
| Bolt pattern | 8 on 180 |
| Finish | Machined |
| Construction | Aluminum |
Vehicle fitment
This is a universal fit wheel, so it is not built around one make, model or year. Because the bolt pattern, center bore and offset decide whether it suits a given hub, compare those figures first.
Confirm the 8 on 180 pattern, 131 center bore and offset against your vehicle, and verify your model year and trim before ordering.
Installation notes
Check the 8 on 180 bolt pattern and 131 center bore against your hub before mounting. Test-fit the wheel and confirm clearance to brakes, suspension and fenders with the tire size you plan to run.
What’s included
The package is a single wheel. Lug nuts, a center cap and a tire are separate items to plan for.











