Overview
The Method Race Wheels 305 NV 20×10 with an 8 on 6.5 bolt pattern is a bronze and black aluminum off-road wheel, part number MRWMR30521080918N. The brand builds its MR305 NV wheels for off-road use, engineering each design for its purpose and checking it through finite element analysis and field tests.
Weight reduction and added strength are the stated goals of the design. The bronze and black finish pairs with a windowed face, a -18 offset and 4.76 backspacing. Confirm the hub’s bolt pattern and center bore before choosing this wheel, since both must match exactly.
Key features
- Windowed MR305 NV design in bronze and black
- Aluminum construction in a 20 by 10 inch size
- 8 on 6.5 bolt pattern and 131 center bore
- Negative offset of -18 with backspacing of 4.76
- Engineered and tested by Method Race Wheels for off-road use
Trail wear and inspection
Wheels on an 8 on 6.5 setup carry vehicle load through the hub, so a loose or uneven fit shows up quickly as vibration. Bronze and black finishes hide small chips, which makes regular inspection more important. Look at the mounting face and bead area after rough trail use, and watch for bent lips that can break a tire seal.
Pairing the wheel with a tire sized for its 20 inch diameter and 10 inch width keeps the rolling radius close to the original. Offset changes shift the scrub radius and load wheel bearings differently, so any suspension lift should be planned with wheel offset in mind.
- Clean the hub face before mounting
- Inspect lips and beads after rock or curb impacts
- Check lug nut torque after new installs
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30521080918N |
| Series | MR305 NV |
| Style | Windowed |
| Finish | Bronze/Black |
| Construction | Aluminum |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | -18 |
| Backspacing | 4.76 |
Vehicle fitment
No vehicle is tied to this wheel. It carries a Universal Fit designation, which is a general label rather than a list of models, years or trims.
Confirm fit for your vehicle’s year, model and trim before ordering. Measure your hub’s 8 on 6.5 pattern before mounting.
Installation notes
Mounting requires a hub that matches the 8 on 6.5 pattern and the 131 center bore. Check fender and brake clearance with the -18 offset before the tires go on.
What’s included
The wheel is the only item covered here. Tires, lug nuts and center caps are not part of this wheel.










