Overview
The AirLift Male Elbow, part number AIR21837, is a plastic 90 degree elbow with a 1/8 MNPT male thread on one end and a 1/4 tube connection on the other. It is universal fit.
Confirm the thread and tube sizes against your air system before installing, since those dimensions decide whether this elbow connects to your fittings.
Key features
- 1/8 MNPT male thread
- 1/4 tube connection
- 90 degree elbow shape
- Plastic body
- Universal fit
Using a right-angle air fitting
Air fittings like this elbow change the direction of an air line where space is tight, such as near a compressor, a tank, or a valve bank on an onboard air system. A 90 degree turn lets the tubing run flat along a frame rail or bracket instead of kinking, which helps keep airflow steady and reduces stress on the joint.
Before buying, match the thread on the elbow to the port it screws into, and confirm the tubing size for the 1/4 tube end. Tube fittings are sensitive to cut quality, so square the tube end cleanly and seat it fully before pressurizing the system. Threaded joints benefit from a suitable thread sealant, and that sealant should be rated for air use. Check for leaks with soapy water once the system is pressurized.
Specifications
| Brand | AirLift |
|---|---|
| Part number | AIR21837 |
| UPC | 70000163173 |
| Material | Plastic |
| Angle | 90 degrees |
| Thread | 1/8 MNPT male |
| Tube connection | 1/4 tube |
| Quantity | One elbow |
Vehicle fitment
Universal fit, so the elbow is not tied to a specific vehicle. Match the 1/8 MNPT thread to the port it screws into.
Installation notes
Depressurize the air system before removing or tightening the elbow.
What’s included
The product describes one plastic elbow.
Not included: Tubing for the 1/4 tube connection.









