Overview
The AirLift 21190 is a 1/2 inch NPT pipe plug for air line fittings. Its counter sunk hex drive lets it sit nearly flush once installed. AirLift files it under air compressor accessories, and it is marked Universal Fit rather than tied to a particular vehicle.
Sealing unused air ports
Pipe plugs close off unused ports so air does not escape. NPT threads are tapered, so they seal by wedging tighter as they are turned. Clean the threads and apply sealant tape or thread compound in the direction of the threads. Turn the plug by hand until snug, then add a short turn with a wrench. Over-tightening can crack a fitting body or strip the threads.
Pipe plugs rarely need replacement, but check them when troubleshooting leaks. A rounded hex drive or damaged threads means the plug should be replaced. Keep a few spares for ports that may be used later, and store them in a clean container so the threads stay protected.
- Clean threads before reapplying sealant
- Hand tighten first, then use a wrench gently
- Inspect the hex drive for rounding
- Keep spares in a clean, dry container
Specifications
| Brand | AirLift |
|---|---|
| Part number | 21190 |
| UPC | 729199211904 |
| Thread size | 1/2 inch NPT |
| Drive | Counter sunk hex |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle is named for the AirLift 21190. It is marked Universal Fit, so it is not vehicle-specific. Confirm the 1/2 inch NPT thread matches your fitting before installing.
What’s included
Check the package contents against your installation before starting.









