Overview
The AirLift Nipples, part number 21729, is a connector fitting that joins two female 3/8 NPT fittings together. It is universal fit, so it is not tied to a specific vehicle.
Use it wherever two female 3/8 NPT fittings need to be joined directly.
Key features
- Connects two female 3/8 NPT fittings together
- Connector fitting type
- Universal fit, with no year, make or model attached
- Listed under air compressor accessories
Joining two female threads
A connector that joins two female ports lets you link two fittings that otherwise would not meet. Common uses include extending a short run, tying two ports together, or bridging a fitting that sits too far from its partner. Both ends must share the same thread form before you assemble anything, or the joint will leak or strip.
Thread sealant is the usual choice for tapered pipe threads, applied to the male ends only. Assemble by hand first, then tighten a little at a time. Once in service, look for weeping at either thread and check for loose joints after the system has cycled a few times.
- Confirm both female ports share the 3/8 NPT thread
- Avoid overtightening threads that will be reused
- Keep the joint out of pinch points and heat
Specifications
| Brand | AirLift |
|---|---|
| Part number | 21729 |
| Fitting type | Connector |
| Connection | Two female 3/8 NPT fittings |
| Fitment | Universal fit |
Vehicle fitment
Universal fit, so it is not tied to a year, make or model. Confirm the 3/8 NPT thread against both fittings before you join them.
Installation notes
Depressurize the air system before removing or adding the connector, and check that both ends seat fully on the threads.
What’s included
The product describes one connector.
Not included: The female fittings it joins and any air line.









