Overview
The AirLift 21372 is a union for air lines with 1/2 inch tubing push lock fittings at all three ends. It is filed under air compressor accessories and air line fittings. AirLift marks it Universal Fit, so it is not tied to one vehicle.
Air line fitting tips
A union joins two lengths of air line, and it is only as good as the tubing preparation and connection. Push lock fittings grip tubing when it is cut square, clean and pushed fully in. A rough or angled cut can leak, so use a proper tubing cutter and deburr the end before inserting it.
Route air lines away from sharp edges, moving parts and hot exhaust areas. Support long runs with clips so the union does not carry the weight of the line. Check connections after the first few cycles, since vibration can slightly loosen a fitting that was installed in a hurry.
Pressure-related failure usually starts at a weak joint. If a fitting keeps leaking after re-seating, replace the tubing end rather than adding more force.
- Cut tubing square and deburr
- Support long runs with clips
- Check joints for leaks after cycling
Specifications
| Brand | AirLift |
|---|---|
| Part number | 21372 |
| UPC | 70000221751 |
| Connections | 1/2 inch tubing push lock fittings at three ends |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle is named for the AirLift 21372. It is marked Universal Fit and is not vehicle-specific. Check that the 1/2 inch tubing size matches your air line system before installing.
What’s included
Other items with the union are not yet known. Check the package contents against your air line system before installing.









