Overview
The AirLift 21370 is a male elbow air line fitting with a 1/2 inch male pipe thread on one end and a 1/2 inch tubing push lock connection at a 90 degree angle. The angled body fits tight spaces where a straight fitting is harder to route. It is universal fit, so it is not tied to any particular vehicle.
Key features
- 90 degree elbow body for tight-space installs
- 1/2 inch male pipe thread on one end
- 1/2 inch tubing push lock connection
- Universal Fit for air line systems
Tight-space routing with push lock
An elbow body keeps a line from kinking where it turns close to a frame rail, a bracket or a panel. Choose the elbow’s direction before you cut the tubing, so the line leaves the fitting at a comfortable angle. Long straight runs after a bend add restriction, so keep the tubing as short as the layout allows.
Push lock connections depend on a clean, square tube end. Cut with a proper tubing cutter, deburr the edge, and push the tube in until it bottoms out. Support the line with clips so the weight of the tubing does not pull on the joint over time.
- Cut tubing square before each push
- Avoid pulling the elbow sideways under load
- Recheck the connection after the first heat cycles
Specifications
| Brand | AirLift |
|---|---|
| Part number | 21370 |
| UPC | 729199213700 |
| Male thread | 1/2 inch male pipe thread |
| Tubing connection | 1/2 inch tubing push lock |
| Angle | 90 degrees |
| Fitment | Universal Fit |
Vehicle fitment
This fitting is universal and not vehicle-specific. Match the 1/2 inch thread and tubing size to the port and air line in your system before installing it.
What’s included
The item is the fitting only. Verify the parts you have against the installation before starting.









