Overview
The AirLift 21848 is a push-to-connect elbow air fitting for quickly attaching hoses on air systems. It has nickel plating and a DOT-approved design, and it is universal fit. The same range also covers straight tubing and branch tees for other air management layouts.
Key features
- Push-to-connect elbow for quick hose attachment
- Nickel plating
- DOT-approved design.
- Same range also includes straight tubing and branch tees
Push-to-connect care and tubing
Push-to-connect fittings are fast to use, but they rely on the tube surface staying clean. Cut tubing square with a proper cutter, wipe off dust, and make sure the outer surface is free of nicks before pushing it in. A scored tube end can seal poorly or slip out once the system is pressurized.
The release collar lets you remove a line for service, so keep it clear of grit and dirt. Avoid side loads on the fitting body, since a bent line can work the connection loose over time. When the tubing becomes hard, cracked or swollen, replace the section rather than forcing a connection.
- Keep release collars free of debris
- Support lines so they do not pull sideways
- Replace tubing that has nicks or flat spots
Specifications
| Brand | AirLift |
|---|---|
| Part number | 21848 |
| UPC | 70000592661 |
| Type | Elbow, push-to-connect |
| Finish | Nickel plating |
| Approval | DOT-approved |
| Fitment | Universal Fit |
Vehicle fitment
This elbow is universal and not tied to a specific vehicle. Check the tubing diameter and connection size in your air system before installing it.
Installation notes
Push the tubing fully into the fitting, then pull gently on the line to confirm it has locked before pressurizing the system.
What’s included
The fitting is the only item included.
Not included: air tubing to connect to the fitting.









