Overview
The King Shocks 25001-331A is an OEM Performance front adjustable coilover shock absorber for the 2014 to 2016 Ford F-150. It fits the FX2, FX4, King Ranch, Lariat, Limited, Platinum, SSV, STX, SVT Raptor, XL and XLT trims and gives 1 to 2 inches of front ride height adjustability.
The design is serviceable, with a monotube internal layout, lightweight hard anodized 6063 aluminum alloy reservoirs, high quality fittings and large shock cylinders. The front kits provide an adjustable ride height and a 25% increase in wheel travel. The 2.5 inch shock bodies with external reservoirs add fluid capacity and help dissipate heat for sustained damping.
Key features
- 1 to 2 inches of ride height adjustability
- Monotube internal design
- Lightweight hard anodized 6063 aluminum alloy reservoirs
- High quality fittings
- Large shock cylinders with 2.5 inch bodies
- Serviceable design with valve adjustments made using simple hand tools
- Damping curves and spring rates tuned through real-world testing.
- Front suspension upgrade with no cutting or welding required
Ride height and front alignment
A front coilover shapes ride height, steering geometry and the way the front tires contact the ground. When the height changes, the camber and toe can shift, so the front end should be checked after any adjustment. Setting the height evenly on both sides keeps the truck level and avoids uneven tire wear, which is especially important on a truck that is used for towing or hauling.
Adjustable coilovers give flexibility, but they work best when the bushings, ball joints and tie rod ends are in good shape. Inspect them during installation and replace worn parts before trusting the new setup. Keep a written record of the ride height at each setting, so you can return to a known height after maintenance or a tire change.
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-331A |
| UPC | 700007235151 |
| Position | Front |
| Type | Adjustable coilover |
| Ride height adjustability | 1 to 2 inch |
| Body diameter | 2.5 inch |
| Reservoir material | Hard anodized 6063 aluminum alloy |
| Internal design | Monotube |
Vehicle fitment
It fits 2014 to 2016 Ford F-150 models in the trims above. Other model years are not covered by this part.
Other F-150 model years and Ford trucks outside this trim list are not covered by this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a bolt-on front unit with no cutting or welding to the vehicle. After fitting, set the ride height within the 1 to 2 inch adjustment range and have the front alignment checked. Adjust both sides evenly so the truck sits level.
What’s included
Check the quantity against your order when the box arrives, since the front axle needs matched units on both sides.









