Overview
The King Shocks 25001-125 is an OEM Performance Series rear shock with a remote reservoir, sold as a pair and fitted to the 2007–2013 Toyota FJ Cruiser in the Base, TRD Special Edition and Trail Teams Special Edition trims. It is a bolt-on rear replacement built with the race-derived design approach used across the performance line.
Each rear unit is gas charged and uses an external remote reservoir, which adds fluid capacity and helps the shock shed heat on long, rough runs. Rear kits in this line allow a 15% travel increase. The body is 2.5 inch in diameter, and the valving can be adjusted with simple hand tools after installation.
Key features
- Rear position for the 2007–2013 Toyota FJ Cruiser per the manufacturer fitment list
- Remote reservoir for added fluid capacity and heat dissipation
- Large 2.5 inch diameter shock body
- Gas charged construction
- Serviceable design with valve adjustments made using simple hand tools
- Rear travel increase of 15%.
Choosing between rear shock setups
Rear shocks on a body-on-frame truck handle axle movement and the load from the cargo bed or a trailer hitch. A standard shock is built for stock height, while a lifted FJ may need a different length or rod end to keep the shock working in its intended range. Compare the shock length and mounting points to the current setup before choosing.
A remote reservoir gives the shock more room to hold fluid, which matters when the truck runs rough roads for long stretches. Rear shocks are usually changed as a pair, and bushings and bump stops should be checked at the same time. Keep the valve adjustments recorded so the setup can be returned to a known baseline.
- Measure the current rear shock length before ordering
- Replace bushings when the shocks are changed
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-125 |
| UPC | 700005378127 |
| Position | Rear |
| Shock series | Performance Series |
| Charge type | Gas charged |
| Reservoir | Remote reservoir |
| Body diameter | 2.5 inch |
| Extended length | 25.290 inch |
| Collapsed length | 15.580 inch |
| Travel length | 9.71 inch |
| Finish color | Blue |
| Lift height | Designed for 0 inch lift or drop |
| Installation | Bolt-on |
| Fitment type | Direct fit |
| Sold as | Pair |
Vehicle fitment
The manufacturer fitment list covers the 2007–2013 Toyota FJ Cruiser in the Base, TRD Special Edition and Trail Teams Special Edition trims. King also offers a custom length rod end version for vehicles running lifted aftermarket suspensions.
Model years outside 2007–2013 and FJ Cruiser trims not named in the list are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a complete bolt-on job with no cutting or welding. Valve adjustments use simple hand tools, so they can be set after the shock is mounted. Raise and support the vehicle on stands before removing either rear shock.
What’s included
A pair of OEM Performance Series rear shocks with remote reservoirs. King states its kits come complete.












