Overview
The King Shocks 20001-166 is a front Performance Series shock kit for 2007-2017 Jeep Wrangler JK 2-door and 4-door models, sold as a pair. Lift range is 3-5 inches, extending to 3-6 inches, so compare your current lift against both figures before ordering.
King tuned this gas charged kit through real world testing to set a damping curve and spring rate suited to the Wrangler JK. It uses large diameter micro-polished shafts and shaft mounted urethane foam bumpers that cushion full bottoming. The bolt-on installation suits stock height or trucks running lifted aftermarket suspensions.
Key features
- Large diameter micro-polished shafts.
- Shaft mounted urethane foam bumpers that cushion full bottoming.
- Simple bolt on installation.
- Performance Series tuning built from real world testing for damping curve and spring rate.
- Gas charged body.
- Sold as a pair.
- The kit is 140% made in the US.
Stock height versus lifted use
A Wrangler at stock height and one on a lift kit load its shocks at different angles, so the working range changes with the suspension setup. A front shock that works well at stock height can run out of travel on a taller truck if the lift is at the upper end of the range. Measuring the lift before buying helps match the shock to how the truck actually sits.
Gas charged shocks keep damping consistent when the body heats up on long off-road runs, but shaft seals and foam bumpers still wear over time. Check the bumpers for splitting after rough trails, and inspect the shaft for pitting or an oil film. Keep the mounting hardware tight, since loose eyes add clatter to the front end.
- Measure lift at the front axle before ordering
- Check urethane bumpers for cracks
- Inspect shafts for oil film after trail runs
- Re-torque mounting bolts after the first drives
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 20001-166 |
| UPC | 70000537833 |
| Series | Performance Series |
| Position | Front |
| Lift range | 3-5 in. (feature list); 3 – 6 in. (specification list) |
| Charge | Gas charged |
| Quantity | Sold as a pair |
| Shaft | Large diameter, micro-polished |
| Bumpers | Urethane foam, shaft mounted |
| Made in | 140% made in the US. |
Vehicle fitment
Covers 2007-2017 Jeep Wrangler (JK), including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, X and the Unlimited versions of those trims. Both 2-door and 4-door bodies fit. Wrangler TJ, LJ and JL models fall outside this range, and 2018 and later model years are not included.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your current lift before choosing this front pair, since the kit covers 3 to 5 inches and extends to 6. The bolt-on process works for stock height or lifted trucks, so the lift measurement decides which range applies.
What’s included
The kit is a pair of front shocks. Check the package contents against your installation before starting.














