Overview
The King Shocks 25001-271 is a pair of OEM Performance Series rear shocks with a piggyback reservoir, made for the 2003–2009 Hummer H2 Base. They are a bolt-on rear suspension upgrade.
Each King kit was subjected to real-world testing to develop optimal damping curves and spring rates for the vehicle. The shocks are built with the same quality of materials and precise tolerances King uses in its high-end race shocks, aimed at owners who drive the vehicle daily or run it as a prerunner. Rear kits allow a 15% travel increase, and the shocks use large 2.5 diameter bodies with external reservoirs.
Key features
- Piggyback reservoir adds fluid capacity for steady damping
- Large 2.5 diameter shock bodies.
- Gas charged construction.
- Serviceable design that allows valve adjustments with simple hand tools.
- Rear kits allow a 15% travel increase.
- Bolt-on installation with no cutting or welding to the vehicle.
- Performance Series construction with materials and tolerances carried over from King’s high-end race shocks.
- Sold as a pair, mounting location rear.
Reservoir and heat on hard runs
A piggyback reservoir gives the shock more room for fluid, which helps it hold steady damping when the vehicle is worked hard on pavement or trail. Heat is the main enemy of consistent damping, so keeping the reservoir free of mud and debris and checking its mounts after rough use is a good habit.
Rear shock service often goes with bushings, rubber mounts and bump stops. Look for oil on the shock body, a rear end that keeps rebounding after bumps, or uneven tire wear. Replacing both sides together keeps the rear axle controlled and avoids a mismatched feel from one side to the other.
- Keep the reservoir clear of debris
- Check reservoir mounts after rough use
- Inspect rubber mounts during service
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-271 |
| UPC | 700005450052 |
| Shock series | Performance Series |
| Position | Rear |
| Mounting location | Rear |
| Fitment type | Direct Fit |
| Lift height | 0 in. lift/drop |
| Hydraulic / gas charged | Gas charged |
| Reservoir | Piggyback |
| Shock body diameter | 2.5 diameter |
| Rear travel increase | 15% |
| Sold as | Pair |
Vehicle fitment
It is a direct fit for the 2003–2009 Hummer H2 Base. The kits are built to bolt into stock vehicles.
Other Hummer H2 trims and the Hummer H3 are not covered. Make sure your year, model and trim match before ordering.
Installation notes
The shocks are a bolt-on upgrade with no cutting or welding. Valve adjustments use simple hand tools. Vehicles with lifted aftermarket suspensions can use the custom length rod end option, so check your suspension height before ordering. Support the vehicle on jack stands before removing the stock units.
What’s included
The kit is sold as a pair of rear shocks. Check the package contents against your installation before starting, including mounting hardware.
Not included: Custom length rod ends for lifted vehicles are offered as an option, not as part of the standard pair.









