Overview
The ARB Old Man Emu BP-51 Internal Bypass Shock, part number BP5160015, is a rear reservoir shock absorber with a 51 mm body. It fits the 1990–1997 Toyota Land Cruiser in the Base trim.
ARB designed and tested the BP-51 range in-house with its Old Man Emu ride engineers. Unlike shocks that adjust compression only, the BP-51 allows rebound and compression to be adjusted independently while the shock stays on the vehicle, so the ride can be set for the vehicle or for a particular trip.
A reservoir shock keeps its gas charge and damping oil in a separate chamber connected to the shock body, which is the design this type of shock uses. Check the stem top and eyelet bottom mounts against the existing mounting points on your vehicle before fitting. Confirm stroke, fitted length and valve settings for your vehicle before ordering.
Key features
- Rear shock absorber in the Old Man Emu BP-51 range
- Independent on-vehicle adjustment of rebound and compression
- Reservoir shock type with a gas-charged body
- Stem top mount and eyelet bottom mount
Reservoir shock maintenance
A reservoir shock separates its oil and gas from the main body, which allows more oil volume and helps the shock resist heat buildup on rough trails. Because the shock can be adjusted while on the vehicle, record its settings before any change so the original feel can be restored.
Inspect the body for oil seepage around the shaft seal, and check the reservoir hose or fitting for damage. A shock that feels soft, bounces after a bump, or makes knocking noises may need service or replacement. Clean the body before inspection so leaks are easy to spot.
- Look for oil around the shaft seal
- Check the reservoir and hose for cracks
- Note adjuster settings before changing them
- Replace shocks that bottom out or bounce repeatedly
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | BP5160015 |
| Shock series | Old Man Emu BP-51 |
| Location | Rear |
| Shock type | Reservoir |
| Top mount | Stem top |
| Bottom mount | Eyelet |
| Body diameter | 51 mm |
| Charge | Gas charged |
Vehicle fitment
It fits the 1990–1997 Toyota Land Cruiser in the Base trim.
Land Cruiser years after 1997 and other Toyota models are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock uses the vehicle’s existing mounting points, so no drilling or welding is needed. Check the mounting type against your vehicle before ordering.
What’s included
The shock is supplied on its own. Confirm the eyelet and stem end hardware suits your installation before starting.







