Overview
The ICON V.S. 2.5 Series Remote Reservoir Shock Set with CDCV, part number ICO57801CP, is a front monotube reservoir set for the 1991–1997 Toyota Land Cruiser Base. It uses hydraulic damping and is gas charged, with a CDC valve built in.
The CDC valve is externally adjustable and restricts oil flow into the reservoir to create 10 levels of compression damping force. A billet aluminum manifold forms a bump zone that ICON says adds about 20% more damping force near full compression. The shocks are configured for their application in length and damping tune and can be rebuilt and revalved.
ICON suggests its OMEGA Series bypass shocks for owners who want a more user-defined setup.
The CDC valve is externally adjustable and restricts oil flow into the reservoir, which creates the 10 levels of compression damping force. A billet aluminum manifold forms the bump zone, which ICON says adds about 20% more damping force near full compression. The shocks are configured for their application in length and damping tune.
The fitment is limited to the 1991 to 1997 Land Cruiser Base, so the model year and trim should be checked before ordering a front set for an older Toyota.
Because the valve is adjusted from outside the shock, the setting can be changed on the truck if the load or the terrain changes.
Key features
- External CDC valve with 10 compression damping levels.
- Bump zone with about 20% extra damping force.
- Monotube reservoir with gas charge.
- Hydraulic damping for consistent control.
- Configured for the Land Cruiser in length and damping tune.
Remote reservoir shock basics
A remote reservoir shock connects the main body to a separate reservoir by hose. That separation lets the shock body stay cooler and keeps damping steadier during repeated hard compression, such as on long rough grades. A monotube design uses one main tube with a floating piston, and the reservoir adds capacity beyond what the body alone can hold.
On an older Land Cruiser, front shocks work through steering, braking and body roll, so check the bushings, mounts and hoses before fitting new units. Shocks that leak, knock or fade on repeated bumps should be looked at promptly. Hose routing matters too: keep the reservoir hose clear of the tire, the steering components and the exhaust.
- Keep the reservoir hose clear of moving parts
- Inspect mounts before fitting
- Check for leaks after the first drive
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO57801CP |
| Shock series | 2.5 Remote Reservoir |
| Position | Front |
| Shock type | Monotube reservoir |
| Valve | CDC, 10 compression levels |
| Damping | Hydraulic |
| Charge | Gas charged |
Vehicle fitment
Fitment is for the 1991–1997 Toyota Land Cruiser Base. Later Land Cruiser generations and the Lexus LX470 do not fit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A front shock set with the CDC valve. Check the mounting hardware against your installation before starting.