Overview
The Fabtech Coil Spring Kit (part number FTS26085) is a rear coil spring kit for a 3-inch lift. It is designed to work with Fabtech part numbers K7069DL, K7070DL, K7071DL and K7072DL.
Match the kit to a Fabtech lift using one of the part numbers K7069DL, K7070DL, K7071DL or K7072DL before ordering.
Key features
- Rear position
- 3-inch lift
- Matches Fabtech part numbers K7069DL, K7070DL, K7071DL and K7072DL
Choosing a matching lift
A rear coil spring carries part of the vehicle’s weight at each wheel, so changing the spring also changes ride height, spring rate and how the rear axle sits under load. When a lift raises the body, the springs and the lift components work best when they are chosen together, so the rear end settles where the suspension was designed to work.
Before buying, match the spring to the lift part number and confirm the vehicle’s year, model and trim. Measure the current rear spring height and wheel gap so you know how much change to expect. Shocks and brake hoses sit in the same area, so check their length and condition while the rear is apart.
- Inspect old springs for sag, cracks and corrosion
- Check rear shocks for leaks and worn bushings
- Look at brake hose length after the lift
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS26085 |
| Position | Rear |
| Lift | 3 inches |
| Compatible part numbers | K7069DL, K7070DL, K7071DL, K7072DL |
Vehicle fitment
No vehicle is named for this kit, so match the spring set to a Fabtech lift using one of the compatible part numbers.
Confirm the compatible part number on the lift you are buying before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rear spring kit for a 3-inch lift changes the rear height, so check the driveline angles and the brake lines after the install.
What’s included
The rear coil spring kit for a 3-inch lift.






