Overview
The King Shocks 25001-124 is a front OEM Performance Series coilover shock with a remote reservoir, sold as a pair and fitted to the 2007–2009 Toyota FJ Cruiser. It is a bolt-on upgrade that replaces the stock front shock with a gas charged unit finished in blue.
The OEM Performance Series is built from the same materials and tolerances used on high-end race shocks, aimed at ride quality on daily-driven or prerunner vehicles. Each design was tested in real-world conditions to set its damping curve and spring rate. The front units offer adjustable ride height and a 25% increase in wheel travel.
Key features
- The external reservoir adds fluid capacity and helps the shock shed heat during sustained use.
- Large 2.5 inch diameter shock bodies, per King’s line description.
- Adjustable front ride height and a 25% wheel travel increase.
- Valve adjustment with simple hand tools, using the same serviceable design King uses on its race shocks.
- Damping curve and spring rate set through real-world testing.
- Available ready to bolt into stock vehicles, or with a custom length rod end for lifted aftermarket suspensions.
Front coilover upkeep
A coilover combines the shock body and spring into one assembly, so the spring rate and damping are matched at the factory. On a truck that sees rough roads, the body seals, the reservoir hose and the mounting bushings all take punishment. Checking them during regular service helps catch small problems before they affect steering or tire wear.
Remote reservoir designs are serviced differently from single-tube shocks, since the reservoir and hose must stay secure and free of kinks. After any change to ride height or valve settings, have the front alignment checked. Clean the shock body with mild soap and water to make leaks easier to spot.
- Check the reservoir hose for kinks or chafing
- Re-check mounting hardware after the first few drives
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-124 |
| UPC | 700005378110 |
| Product line | OEM Performance Series |
| Position | Front |
| Reservoir | Remote |
| Charge type | Gas charged |
| Finish color | Blue |
| Extended length | 21.690 inch |
| Collapsed length | 16.80 inch |
| Travel length | 4.89 inch |
| Shock body diameter | 2.5 inch |
| Lift height | 0 in. lift/drop (direct fit) |
| Installation | Bolt-on |
| Sold as | Pair |
Vehicle fitment
The manufacturer fitment list covers the 2007–2009 Toyota FJ Cruiser in the Base, TRD Special Edition and Trail Teams Special Edition trims.
Other Toyota models and model years outside 2007–2009 are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
King describes these as complete bolt-on shocks, with no cutting or welding needed on the vehicle. Valve adjustments can be made with simple hand tools. Vehicles with lifted aftermarket suspensions can use the custom length rod end version. Support the front end on jack stands before removing the stock shocks.
What’s included
The kit is sold as a pair of front coilover shocks. Confirm the included mounting hardware before installation.











