Overview
The JcrOffroad Weld-on D-Ring Tabs, part number DIY-DRT, are tabs welded onto a build to hold a D-ring. They suit universal applications and are not tied to a specific vehicle.
Because the tabs are welded rather than bolted, plan the mounting location and welding before you start.
Welding and placement tips
Welded tabs carry load through the weld rather than through bolts, so the base metal matters. Clean paint, rust and coatings from the mounting area before welding, and confirm the surface is solid. Position the tab where it will not be pinched or pulled against the body. Good penetration matters more than appearance.
A recovery strap or shackle can load a D-ring hard, so the tab and the frame or body beneath it need to share that force. Check the welds after heavy use and look for cracks around the edges. If a tab moves, grind and re-weld the area rather than tightening anything.
- Grind coatings off the weld area first
- Inspect welds after each heavy recovery
- Plan welding equipment and skills before starting
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | DIY-DRT |
| UPC | 780456968832 |
| Attachment | Weld-on |
| Application | Universal |
Vehicle fitment
Vehicle fitment is not confirmed for these tabs. They are not vehicle-specific, but the mounting location must suit your vehicle’s frame or body.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires welding the tabs in place, so it is not a bolt-on job.
What’s included
Confirm the tab count and hardware you receive before starting the weld.
Not included: welding equipment.












