Overview
The ICON Vehicle Dynamics Ram HD 2″ Front Coil Spring Spacer Kit (part number IVD2120) is a front spacer kit that gives a 2-inch front lift on the Dodge Ram 2500 and 3500 HD pickups from 1994 through 2010, and the 2011–2012 Ram 2500 and 3500.
ICON Vehicle Dynamics makes aftermarket suspension parts for trucks, SUVs and off-road use.
Key features
- 2-inch front lift
- Front-only spacer kit
- Direct fit for the heavy-duty Ram 2500 and 3500
Heavy-duty front spacers
Front spacers on heavy-duty Ram trucks raise the front by changing where the coil springs seat, which means the suspension geometry changes with them. A 2-inch change at the front can alter the upper control arm angles, the steering geometry and the driveline angle. That is why alignment and driveline checks belong in the post-install steps.
Heavy-duty Ram trucks often carry more front load than lighter pickups, especially when towing or hauling. Under load, the shocks and ball joints work harder, so inspect them before the install and replace worn parts while the front is apart. Tires should also be checked for uneven wear after the spacers are in.
Choosing the right spacer depends on the truck’s year and model range, since the heavy-duty Ram lines changed over time. Confirm the year range before ordering, and note the stock front height for reference if you plan to return to factory setup.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | IVD2120 |
| Position | Front |
| Front lift | 2 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1994–2010 Dodge Ram 2500 and 3500 in the Base, Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX and TRX4 models, and the 2011–2012 Ram 2500 and 3500 in the Laramie, Laramie Longhorn, Outdoorsman, Power Wagon, SLT and ST models.
The 2013 and newer Ram HD trucks use a different kit (IVD2121) and are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spacer raises the front, so check the front alignment and driveline angle after installation.
What’s included
The kit is a front-only spacer set with a 2-inch lift. Make sure the parts in the box match your installation plan before starting.

