Overview
The ICON Vehicle Dynamics ICO48611 is a rear EXP coilover shock absorber for the 2021 to 2026 Ford Bronco equipped with the HOSS 1.0 suspension package. EXP keeps the factory coil spring and other components while replacing the shock. On HOSS 1.0 trucks, ICON rates it for 1.5 to 3 inches of rear lift over stock.
The shock uses a 2.5-inch diameter aluminum body. The larger piston and shock oil volume help heat dissipation compared with the smaller steel bodied factory shocks, which supports steady performance over long runs at higher speed and on rougher terrain. The one-piece digressive piston is tuned for the Bronco in combination with its stock coil springs, and the shock can be revalved and rebuilt by a qualified technician.
Key features
- Re-uses the Bronco’s factory coil spring and OE upper shock and spring mounts
- Snap-ring grooves for rear ride height from 1.5 to 3 inches over stock
- One-piece impact-extruded aluminum body with hard anodized finish
- 7/8-inch induction hardened and chrome plated shaft
- One-piece digressive piston design
- Fully rebuildable and revalveable, with parts available from ICON
Signs the rear shocks need service
Rear shocks wear gradually, so changes in ride are often the first sign. Watch for oil on the shock body, a bouncy rear after bumps, cupping on the tires or a knock when the rear axle changes direction. A shock that feels soft over repeated bumps can also indicate that the internal valving has worn.
The aluminum body and one-piece piston are designed to be rebuilt and revalved by a qualified technician. Before replacing a rear shock, inspect the mounts, bushings and spring seat, because worn hardware can mimic shock failure. Keep the shocks matched as a pair so the rear of the Bronco handles the same on both sides.
- Oil leaks along the shock body
- Bounce after repeated bumps
- Uneven tire wear at the rear
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO48611 |
| Shock series | 2.5 Coilover |
| Shock type | Coilover |
| Body diameter | 2.5 inches |
| Shaft diameter | 7/8 inch, induction hardened, chrome plated |
| Top mount | OEM |
| Bottom mount | Eyelet |
| Lift range | 1.5 to 3 inches over stock on HOSS 1.0 |
| Hydraulic or gas charged | Gas charged |
| Location | Rear |
| Fitment type | Direct fit |
| Vehicle | Ford Bronco, 2021 to 2026, HOSS 1.0 |
Vehicle fitment
It fits the 2021 to 2026 Ford Bronco in the Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
Badlands are not covered, because they come with the HOSS 2.0 package as standard. The shock is not compatible with the Bronco Raptor. Before ordering, confirm the year, model and trim against your Bronco.
Wheel and tire notes
ICON’s recommended wheel is 17 by 8.5 inches with a 5.75-inch backspace and 25mm offset. The recommended tire is 35 by 12.50 inches, and 37-inch tire packages require trimming and modifications.
What’s included
EXP shocks are sold individually, and two are required per vehicle. Check the mounting hardware against your installation before starting.





