Overview
The ICON Vehicle Dynamics ICO96519 is a rear VS 2.0 Aluminum Series shock for the 2019 to 2023 Ford Ranger. ICON rates it for use with lifts of up to 1.5 inches. It is a gas charged monotube shock with an internal reservoir, and it is sold individually.
The Vehicle Specific 2.0 Aluminum Series is an upgrade for daily driving and weekend off-road use. The shock uses a one-piece linear and digressive piston with vehicle-specific valving, tuned for ride quality on and off the road. For heavier off-road use, the 2.5 Series shocks are the alternative to consider.
Key features
- Premium grade 5WT shock oil for steady damping across a wide temperature range
- Nitrogen charged monotube with an internal reservoir
- One-piece linear and digressive piston with vehicle-specific valving
- 5/8-inch chrome plated, hardened steel shaft that resists corrosion and pitting
- 6061 aluminum rod end, top cap and internals
- 6063 anodized aluminum body for heat dissipation and corrosion resistance
- Polyurethane bushings and zinc plated sleeves for OE-type fitment
- Buna top out bumper for quiet operation
- 100 percent rebuildable and 100 percent revalveable
Matching lift and rear shocks
Rear shocks on a Ranger control axle movement over bumps and under braking, and their fit with the lift matters. Shocks sized for a modest lift keep suspension geometry close to the original design. Once lift goes beyond the rated range, shock travel and bump stop contact can change, which affects ride quality and wear.
The leaf springs and rear shocks work as a system, so consider both when replacing the shock. If the springs have settled or the truck sits uneven, inspect them before fitting new shocks. Replacing rear shocks in pairs keeps damping matched across the axle, and checking bushings and mounting hardware at the same time prevents loose parts from undoing the upgrade.
- Confirm rear lift before ordering
- Inspect leaf spring condition
- Replace rear shocks in pairs
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO96519 |
| Shock series | VS 2.0 Aluminum Series |
| Shock type | Monotube shock kit |
| Lift range | Up to 1.5 inches |
| Shaft | 5/8-inch chrome plated, hardened steel |
| Body | 6063 anodized aluminum |
| Bushings | Polyurethane, with zinc plated sleeves |
| Bumper | Buna top out |
| Hydraulic or gas charged | Gas charged |
| Location and position | Rear |
| Fitment type | Direct fit |
| Vehicle | Ford Ranger, 2019 to 2023 |
Vehicle fitment
It fits the 2019 to 2023 Ford Ranger in the Lariat, XL and XLT trims.
The list covers 2019 to 2023 Ford Ranger models only, so other Ranger years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is rated for lifts of up to 1.5 inches. Larger lift heights fall outside that rating, so check the rear lift on the truck before choosing this shock.
What’s included
The shock is sold individually. Confirm the quantity needed for both rear positions before ordering.
