Overview
The Icon Suspension 76535 is a rear 2.0 shock absorber for 5-8 inch lift applications on 01-10 GM full-size 2500/3500 HD trucks. It belongs to Icon’s Vehicle Specific (V.S.) 2.0 Aluminum Series, which Icon describes as a cost-effective upgrade for everyday street drivers and weekend warriors who want better on- and off-road performance from their suspension.
Icon engineers tailored the V.S. 2.0 Aluminum Series to specific applications. The rear shock is nitrogen charged with a monotube design and an internal reservoir, uses a one-piece linear/digressive piston, and is both rebuildable and revalveable. Icon points owners who put their trucks through extreme off-road use toward the V.S. 2.5 Series, which is built to handle more punishment.
Key features
- Nitrogen charged monotube design with internal reservoir
- One-piece linear/digressive piston design, which Icon says provides ride quality on and off road
- Premium grade 5WT shock oil intended for consistent damping
- 5/8 inch polished nitro steel shaft, which Icon says resists flaking and pitting better than standard chrome shafts
- 6061 aluminum rod end, top can and internals
- Polyurethane bushings and zinc plated sleeves for OE-type fitment
- 6063 anodized aluminum body and reservoir tubing, which Icon cites for heat dissipation and corrosion resistance
- 100% rebuildable and 100% revalveable
- Buna top-out bumper for noise-free operation
Before you install
Rear shocks control how fast the springs compress and rebound, which keeps the tires in contact with the ground over uneven terrain. A lift changes the shock’s mounting angle and travel, so the length and stroke of the replacement matter as much as its damping. Measure current ride height and check the shock at full extension before installing.
Shocks are often replaced with related suspension parts. Bump stops, springs and control arm bushings wear over the same miles, so inspecting them during the same job avoids a second teardown. Check mounting hardware for corrosion and replace any bushings that are cracked or collapsed. Keep a record of the original settings before any revalving.
- Inspect the shaft for pitting and oil film
- Look for cracked or hardened bushings
- Check bump stops for compression and wear
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 76535 |
| UPC | 700006854491 |
| Product line | Vehicle Specific (V.S.) 2.0 Aluminum Series |
| Position | Rear |
| Lift range | 5-8 inch lift |
| Application | 01-10 GM full-size 2500/3500 HD |
| Fitment type | Direct Fit |
| Construction | Nitrogen charged monotube with internal reservoir |
| Shock oil | Premium grade 5WT |
| Shaft | 5/8 inch polished nitro steel |
| Rod end, top can and internals | 6061 aluminum |
| Body and reservoir tubing | 6063 anodized aluminum |
| Bushings | Polyurethane |
| Sleeves | Zinc plated |
| Bumper | Buna top-out |
| Rebuildable | 100% |
| Revalveable | 100% |
Vehicle fitment
It fits 01-10 GM full-size 2500/3500 HD trucks with a 5-8 inch lift and is a direct fit for those applications.
Other GM model years, trims and lift heights fall outside this application. Confirm fit for your vehicle’s year, model and trim before buying.
What’s included
It is a rear shock absorber from the V.S. 2.0 Aluminum Series, with the parts covered in the features above.
Not included: Compare the package contents with your installation plan before starting.



