Overview
The Icon Suspension K93081 is a stage 1 suspension system for the 2015 and later Ford F-150 4WD. It uses adjustable coilover shocks that give 0 to 2.5 inches of lift and increase wheel travel and damping over stock.
The system keeps the truck’s towing capacity unchanged and uses valving developed for the lighter weight of the 2015-and-up F-150. It is a bolt-on system with no drilling, cutting or welding required.
Key features
- Adjustable coilover shocks, 0 to 2.5 inches of lift height
- Vehicle specific tuned front and rear shocks
- Front coilovers have an internal reservoir and Eibach coil springs.
- Corrosion resistant coilover shock body with a 7/8 inch shaft
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for longevity and minimal deflection
- 2.0 aluminum body rear IFP shock with a 5/8 inch polished nitro steel shaft
- 6061 aircraft grade aluminum CNC machined components
- It is made in the USA.
Setting ride height
Adjustable coilovers let you set ride height after the install, which helps when you change wheels or tires. Measure the height at each corner before and after each adjustment so the truck sits level, and recheck it once the new tires have settled.
Shocks wear over time, and the seals and reservoir on a coilover are the first places to look for leaks. Check the shock bodies for oil residue and feel for a loose mount. Keep the rod end bearings clean and replace them if they feel rough or sloppy.
Towing and cargo load affect how the suspension sits, so re-check height and alignment after adding a heavy bumper, winch or trailer hitch. Heavier loads can change the feel of the ride and the way the truck responds in corners.
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | K93081 |
| UPC | 700007279691 |
| Lift height range | 0 to 2.5 inches, adjustable |
| Front shock shaft | 7/8 inch |
| Rear shock shaft | 5/8 inch polished nitro steel |
| Aftermarket wheels | 8 to 9 inch wide, 5 inch backspace |
| Aftermarket tires | 33 x 11.50 tall; larger tires may need fender trimming |
The coilovers adjust in height from 0 to 2.5 inches, so the ride height can be set to suit a chosen wheel and tire combination. The front shocks use an internal reservoir for better cooling.
Vehicle fitment
It is for the 2015-2026 Ford F-150 4WD. The 2015 and up years are covered, and coverage is limited to 4WD trucks. Confirm the year, model and trim against your vehicle before ordering.
Installation notes
The system is 100 percent bolt-on with no drilling, cutting or welding. Larger tires than 33 x 11.50 tall may need fender trimming and modifications, so check clearance before you choose a wheel and tire package.
What’s included
Included: the stage 1 coilover front shocks, rear shocks and Eibach coil springs. Check the package contents against your installation before starting.





