Overview
The ICON Vehicle Dynamics 78721 is a 1-inch rear lift block kit for the 2015–2022 Chevrolet Colorado and GMC Canyon. It adds lift at the rear over the stock stance, and the kit contains two 1-inch lift blocks with U-bolts.
The kit installs at the rear only, so it raises the back of the truck without changing the front. It is a direct fit for the Colorado and Canyon models covered by this kit.
Key features
- 1-inch lift blocks at the rear
- Adds lift over the stock stance
- U-bolts included
- Direct fit for the listed Colorado and Canyon models
Rear-only lift considerations
Rear blocks raise the axle relative to the frame, which changes the driveline angle and can shift how the truck sits under load. Because the front stays at its stock height, the stance can look uneven, and the ride may feel firmer at the back when the bed is empty. Think about how the truck is used before choosing a rear-only lift, especially if it is often loaded or towing.
Lift blocks work with the existing springs and shocks rather than replacing them, so the condition of those parts affects the result. Worn leaf springs, bushings and shackles are often replaced at the same time as a lift. Check the mounting hardware after the first few drives, because U-bolts settle as the truck is used.
- Check the driveline angles after installation
- Inspect leaf springs, shackles and bushings before fitting
- Retorque the U-bolts after the first few drives
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO78721 |
| Type | Rear lift block kit |
| Lift height | 1 inch per block |
| Quantity | 2 lift blocks |
| Position | Rear |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2015–2022 Chevrolet Colorado, including the Base, LT, WT and Z71 trims, and the 2015–2022 GMC Canyon, including the AT4, All Terrain, Base, Denali, Elevation, Elevation Standard, SL, SLE and SLT trims.
The list does not cover the Colorado or Canyon from 2014 or 2023 onward, or the ZR2 trim. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear blocks change the driveline angle, so have the driveline angles checked after installation.
What’s included
Two 1-inch lift blocks, U-bolts, nuts and washers.





