Overview
The Rock Monster 18×9 DOT beadlock wheel from Hutchinson Wheels, part number HUT60863-023-1, is an argent aluminum wheel built for an internal beadlock. A beadlock holds the tire bead against the rim, which supports running lower tire pressure over soft ground such as sand, mud or snow.
The internal design keeps the wheel street legal. The wheel is sized by diameter, width, bolt pattern and offset, and it is universal fit rather than vehicle-specific.
Key features
- Internal beadlock design, stated to keep the wheel street legal
- Argent finish on aluminum construction
- 18-inch diameter and 9-inch width
- 5 on 5 bolt pattern
- Offset -0.51 and backspacing 4.62
- Rock Monster series wheel from Hutchinson Wheels
Before you buy
Offset and backspacing decide where the wheel sits, and they work together. A wheel with a lower offset moves outward, which can rub on tie rods or the fender, while backspacing shows how much room remains behind the wheel for brakes and suspension parts. Test fit with the tire mounted before committing to a full set, and check steering lock as well.
Finish is one part of the decision, but fit and load matter more. A beadlock keeps the tire seated at low pressure, so pick a tire rated for the load and the pressure you intend to run. Inspect the bead seat and locking ring after rough trail use, and keep the valve stem position in mind so it stays reachable after mounting.
Specifications
| Brand | Hutchinson Wheels |
|---|---|
| Series | Rock Monster |
| Part number | HUT60863-023-1 |
| Style | Beadlock |
| Construction | Aluminum |
| Finish | Argent |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5 |
| Offset | -0.51 |
| Backspacing | 4.62 |
| Fitment | Universal fit |
Vehicle fitment
This wheel is universal fit and is not tied to a specific year, make or model. Check the 5 on 5 bolt pattern, -0.51 offset and 18-inch diameter against your hub and brake and suspension clearance before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the lug hardware and lug seat type for your hub before mounting. Inflate the tire with standard bead-seating steps for beadlock fitment.
What’s included
The wheel is the item supplied. Confirm whether tires, lug nuts and valve stems are needed for your install.
Not included: Tires must be supplied separately.















