Overview
The ICON Vehicle Dynamics Rebound 17×8.5 in titanium, part number ICO1817857345TT, is an aluminum spoke wheel built on a 5 on 5 bolt pattern with an offset of -6. It suits Jeep, pickup and SUV owners who want the Rebound’s concave spoke face in a titanium finish.
Backspacing of 4.5 and a center bore of 72 complete the dimensions. The spoke layout and offset are set so the wheel clears calipers and moves freely through suspension travel, and they reduce scrub radius. Universal Fit is the fitment tag, and no vehicle year, model or chassis code is matched to this wheel.
Key features
- Titanium finish on a spoke style wheel
- Aluminum construction at 17 by 8.5 inches
- Negative offset of -6 with backspacing of 4.5
- Caliper clearance and suspension travel design described by the brand
- 5 on 5 bolt pattern with a 72 center bore
Titanium finish care
Titanium-finish aluminum wheels are chosen for a bright, slightly warm metallic look that shows less brake dust than darker finishes. The finish still scratches, so use soft wash mitts and avoid stiff brushes around the spoke edges. Rinse brake dust and road salt off regularly to keep the surface from pitting.
Lug fasteners and the mounting face deserve attention before and after each tire change. Clean the hub face and the back of the wheel so it seats flat, and recheck lug nut tightness after the first short drive. Keep parts that match the wheel, such as the right seat style and any hub-centric ring, together for future service.
- Rinse brake dust off with mild soap
- Avoid abrasive pads on the spoke faces
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO1817857345TT |
| Series | Rebound |
| Style | Spoke |
| Diameter | 17 Inches |
| Width | 8.5 Inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | -6 |
| Backspacing | 4.5 |
| Finish | Titanium |
| Construction | Aluminum |
| Fitment label | Universal Fit |
Vehicle fitment
No year, make, model or trim is named for this titanium wheel. Treat the 5 on 5 pattern and 72 center bore as the fit check against your hub before anything else.
Negative offset moves the mounting face outboard, so brake and fender clearance should be confirmed for your setup. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Dry fit the titanium wheel on your hub and check clearance at full steering lock before the tire is mounted. Use lug fasteners suited to aluminum wheels and tighten them in the sequence the vehicle requires.
What’s included
One titanium wheel is described, with no lug nuts, center caps or valve stems listed.
Not included: Tires and lug hardware are outside this product and must be obtained separately.