Overview
The FUEL Off-Road D675 Blitz 20×8.25 is a gloss black split spoke aluminum wheel, part number MHTD67520828D45, with an 8 on 6.5 bolt pattern. FUEL Off-Road lists Universal Fit for it, so no single vehicle is named. Confirm the hub’s bolt pattern and center bore before mounting.
The -265 offset and -5.81 backspacing set where the mounting face sits in the wheel. Check clearance to the fender, brake parts and inner suspension against your vehicle before choosing this wheel.
Key features
- Split spoke design
- 20-inch diameter and 8.25-inch width
- 8 on 6.5 bolt pattern
- Center bore of 122
- Offset of -265 and backspacing of -5.81
- Gloss black finish and aluminum construction
Tire size and clearance
Tire diameter, sidewall height and width all change the rolling size and the space between the tire and the fender. A larger tire can reduce clearance at full steering lock, while a tire that is too narrow for the wheel may not seat well on the bead. Choosing a size should start with the rim width and then move to the overall diameter the truck can accommodate.
Once tires are mounted, drive slowly in a full left and full right turn and listen for contact noises. Inspect the inner edge of the tire and the fender lip after the first few drives, since small rubs can grow over time. Keep the tire pressure consistent on both sides of an axle to reduce uneven wear.
- Check tire load rating before choosing a size
- Test steering lock with the tire fully mounted
- Look for rub marks on the inner tire wall
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD67520828D45 |
| Model | D675 Blitz |
| Diameter | 20 inches |
| Width | 8.25 inches |
| Bolt pattern | 8 on 6.5 |
| Offset | -265 |
| Center bore | 122 |
| Backspacing | -5.81 |
| Style | Split Spoke |
| Finish | Gloss Black |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
Because the wheel is universal, it is not matched to a model year or trim. Suitability depends on the 8 on 6.5 bolt pattern, the 122 center bore, the -265 offset and the tire size you intend to run.
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the hub bolt pattern and clearance for your truck before mounting.
Installation notes
Check that the 8 on 6.5 bolt pattern and 122 center bore fit your hub, then verify clearance with the tire mounted. Wheels with negative offsets can rub the fender or inner suspension when clearance is short, so test the turning radius afterward.
What’s included
One 20×8.25 D675 Blitz wheel in gloss black.
Not included: Tires and lug hardware are not part of this wheel.















