Overview
G2 Axle and Gear part 20-2029-29 is a rear replacement internal gear kit for Chrysler 8.25 inch differentials with 29 splines and an open case. Use it to renew damaged or worn gears while keeping the existing carrier in service.
Fit is set by the axle type and the 29 spline count, so measure before ordering. This kit is for rear Chrysler 8.25 inch axles and is matched by axle type rather than by vehicle.
Key features
- Internal gear kit for Chrysler 8.25 inch rear axles
- Axle spline count of 29 splines
- Open case design
- Renews worn or damaged gears inside the carrier
- Direct fit for the Chrysler 8.25 inch rear axle type
Choosing between spline counts
Chrysler 8.25 inch axles are made in more than one spline count, and the two versions look similar from the outside. The only reliable way to choose is to count the splines on the axle shaft and compare that number with the kit before buying. Trying to adapt one count to the other will shorten the life of the gears and can damage the carrier.
When the spline count is confirmed, look at the rest of the rebuild. Replace bearings that show wear, check the case bores and inspect the pinion seal. Setting up gear mesh and backlash correctly is the step that most affects how quiet and durable the new set will be.
- Count the splines on the axle shaft before ordering
- Confirm the axle is a rear Chrysler 8.25 inch type
- Replace bearings and seals that show wear
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 20-2029-29 |
| UPC | 631410093339 |
| Axle type | Chrysler 8.25 Inches |
| Axle location | Rear |
| Axle spline | 29 splines |
| Case type | Open |
Vehicle fitment
Fitment is based on the axle size and spline count: rear Chrysler 8.25 inch axles with 29 splines and an open case. No model years are attached to the kit.
A 27 spline Chrysler 8.25 inch kit is a different spline count, so do not substitute it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set up this 29 spline gear set with an experienced differential shop, since the gears must be aligned during assembly. Plan on a break-in period after the carrier is reassembled.
What’s included
The internal gear kit is described without a part-by-part list. Its purpose is replacing worn or damaged gears inside the differential.
Not included: The carrier, axle housing and axle shafts are not part of this set.





