Overview
The Rugged Ridge 15201.14 is a pair of black, 1.25 inch thick aluminum hub centric wheel spacers for a 5 on 5 bolt pattern. Spacers of this type move the wheel outward to help fit wider tires, widen the track and improve stability.
The spacer body is extra thick 6061T6 aluminum with a double anodized black finish for corrosion resistance. All hardware is grade-8.
Key features
- Hub centric design
- 1.25 inch thickness
- Extra thick 6061T6 aluminum
- Double anodized black finish
- Grade-8 hardware
- 5 on 5 bolt pattern
Hub centric fit basics
Hub centric spacers locate on the hub bore, so the wheel centers on the hub rather than relying only on the lug nuts. That helps reduce vibration and stud stress when the hub bore matches the spacer. Measure the hub before buying, because a mismatch leaves the wheel off-center even with the nuts tight.
Aluminum spacers with a double anodized finish resist corrosion, but the hub face and spacer face should still be cleaned and inspected at tire changes. Corrosion or debris between faces can affect how the wheel seats. Re-torque after the first trail runs and look for wear on the hub bore.
- Clean the hub and spacer faces before mounting
- Measure hub bore against the spacer
- Re-check torque after early drives
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15201.14 |
| UPC | 804314274146 |
| Type | Spacer |
| Thickness | 1.25 inch |
| Material | Aluminum, 6061T6 |
| Finish | Black, double anodized |
| Bolt pattern | 5 on 5 |
| Hub design | Hub centric |
| Hardware | Grade-8 |
Vehicle fitment
It is marked universal fit. Being hub centric and sized for a 5 on 5 bolt pattern, it must be matched to your wheel and hub before you choose it.
Confirm your vehicle’s year, model and trim before ordering. Vehicles or wheels with other bolt patterns are not covered.
Installation notes
Hub centric spacers depend on a correct hub match, so measure the hub before mounting. Check clearance at the fender and brake parts with the spacer installed.
What’s included
Check that you have studs and lug nuts that suit a 5 on 5 pattern before mounting.












