Overview
The FUEL Off-Road D517 Krank 17×9, part number MHTD51717908250, is a matte black milled aluminum wheel built for an 8 on 6.5 bolt pattern with a 125 center bore. Its 17-inch diameter and 9-inch width suit a truck or SUV whose hub carries 8 studs on that 6.5 pattern.
The Krank face is milled and finished in matte black. Offset is 1 and backspacing is 5, which set how deep the wheel sits behind the fender and how close the back of the rim comes to the brakes and suspension. Those two figures deserve as much attention as diameter and width when you choose a wheel for a particular rig.
Confirm the stud count and the 6.5 pattern on your hub first. The 125 center bore also has to match the hub so the wheel centers correctly, and that check should come before any tire work begins.
Key features
- Single 8 on 6.5 bolt pattern for 8-stud hubs.
- Center bore 125 as recorded for this model.
- 17-inch diameter paired with a 9-inch width.
- Krank style with a matte black milled finish.
- Aluminum construction, with offset 1 and backspacing 5.
Stud count and hub fit
An 8 on 6.5 pattern is less common than 5 and 6 lug layouts, so the hub must carry 8 studs on that exact spacing. Measure the stud count and the distance across the studs before buying, and confirm the 125 center bore matches the hub so the wheel centers properly. A wheel that fits the studs but not the bore can vibrate or sit crooked, even if it looks like it bolts on.
Sizing the wheel around the tire matters as well. A 17-inch wheel with a 9-inch width changes the tire options compared with a stock size, so choose tires with a matching rim width and a load rating the truck needs. Offset 1 and backspacing 5 set the wheel’s position inside the fender, so inspect clearance before the first drive. Keep a torque wrench handy and recheck lug torque after the first miles.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD51717908250 |
| Style | Krank |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | 1 |
| Backspacing | 5 |
| Finish | Matte black milled |
| Construction | Aluminum |
Vehicle fitment
The wheel carries no vehicle entry, leaving the year, make, model and trim unconfirmed. The Universal Fit label is a general tag, while the 8 on 6.5 pattern, the 125 center bore and the offset must match the hub and clearance of the specific vehicle.
Measure the stud count and pattern on your hub, and review clearance for offset and backspacing before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a single-pattern wheel, so the hub must carry 8 studs on a 6.5 pattern; a six-stud hub will not accept it. Lift the wheel onto the studs, hand-start the lugs and tighten them in a star sequence with a torque wrench set to the vehicle’s specification. Tire mounting and balancing are outside this product and should be done by a tire shop.
What’s included
The product covers one wheel with no tire attached.
Not included: Lug hardware and center caps are not included, so arrange them separately. No tire comes with this product.









