Overview
FUEL Off-Road’s Maverick 20×9 wheel, part number MHTD53820901857, is an aluminum spoke wheel with a black milled finish and an 8 on 180 bolt pattern. Its offset is 20 and its backspacing is 5.8, which differ from the offset-1 versions in the same family, so the numbers matter when choosing a fit.
The wheel is 20 inches in diameter and 9 inches wide, with a center bore of 125. No vehicle is named, so check these figures against the hub and brake clearance of the truck or SUV you have in mind.
Key features
- Spoke design with a black milled face
- Aluminum construction
- 20-inch diameter and 9-inch width
- 8 on 180 bolt pattern
- Offset 20 and backspacing 5.8
- Center bore 125
Offset and inner clearance
Offset governs how far the mounting face sits from the wheel centerline, which in turn sets how far the wheel reaches toward the suspension and out toward the fender. Backspacing gives the same information from the back side of the wheel. Reading the two together gives a clearer picture of inner clearance than either number alone.
Inner clearance is usually tightest near the brake caliper and the control arm or strut. Measure from the hub face to the nearest component with the wheel off, then compare that space with the backspacing before mounting. Tire choice also matters, since a taller tire adds outward reach on the same wheel.
- Check caliper clearance with the wheel off
- Compare backspacing against the strut or control arm
- Look for rub marks after the first drive
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD53820901857 |
| Model | Maverick |
| Style | Spoke |
| Finish | Black, milled |
| Construction | Aluminum |
| Wheel diameter | 20 Inches |
| Wheel width | 9 Inches |
| Bolt pattern | 8 on 180 |
| Center bore | 125 |
| Offset | 20 |
| Backspacing | 5.8 |
Vehicle fitment
This wheel is marked as universal fit, so it carries no year, make, model or trim. An offset of 20 with backspacing of 5.8 places the mounting face differently from the offset-1 wheels in this line, which changes inner and outer clearance.
Universal fit does not confirm clearance for any particular vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the inner clearance to suspension and brake parts before mounting, because offset and backspacing both affect it. Verify the 8 on 180 pattern against the hub; a mismatch can damage studs and hubs.
What’s included
Only the wheel is covered; tires, lug nuts and center caps are a separate purchase.
Not included: tires, lug nuts and center caps.









